Humanoid robots must coordinate locomotion and manipulation in everyday environments, yet progress is difficult to assess across differing policies, controllers, and task settings. LocoManiLab provides an integrated testbed spanning data collection and generation, policy training, evaluation, and physical deployment. Its task suite covers 234 atomic and compositional tasks across five household scene categories, supported by 51.5 hours of simulated teleoperation. The evaluation covers twelve policies with a shared controller across task and scene splits and perturbation levels, two policies across five controllers, and studies of demonstration scale and data-source mixtures. Success rates fall on unseen tasks and scenes and generally decline as visual perturbations increase, with differences in generalization and robustness across policies. For data generation, a humanoid motion generation model is fine-tuned for loco-manipulation to study the alignment of its outputs with task execution requirements and its integration into the data generation pipeline. Three simulated loco-manipulation tasks closely match real-world setups, enabling evaluation of three policies in both domains. Similar policy rankings support the reliability of simulation-based evaluation.
https://arxiv.org/abs/2610.30876
We examine how closely pretrained LeWorldModel (LeWM) reproduces the effects of small action changes. Using matched simulator and model responses, we measure action sensitivity with Gram matrices at three perturbation scales. Across nearly a thousand states from Reacher and OGBench Cube, the most sensitive action directions differ by median angles of about $36^\circ$ and $42^\circ$, respectively, at the smallest scale. Increasing the perturbation tenfold reduces median normalized Gram discrepancy by roughly 70\% on Reacher and 47\% on Cube. Geometry measured in pixels and embeddings varies more across scales than the chosen physical-state geometry. On held-out directions, environment Grams achieve median embedding response errors of 17\% and 28\%, compared with 26\% and 38\% for an isotropic reference with the same trace. LeWM's errors are higher at this scale. These findings support scale-specific evaluation of action sensitivity; its effect on control remains an open question.
https://arxiv.org/abs/2610.31716
Reliable traversability estimation is essential for autonomous navigation on unstructured terrain. State-of-the-art approaches typically evaluate traversability from deterministic terrain elevation, thereby overlooking spatial correlations in the terrain and failing to account for how elevation uncertainty propagates through nonlinear traversability mappings. We propose ProTrav, a probabilistic terrain representation that uses function-space sampling to generate spatially correlated terrain realizations and propagate elevation uncertainty to traversability cost. First, a Sparse Variational Gaussian Process (SVGP) reconstructs a probabilistic elevation field from observations. Then, posterior function-space sampling generates spatially correlated terrain realizations, preserving spatial dependencies between neighboring locations while propagating elevation uncertainty through geometric features into traversability cost. Consequently, a distribution of traversability cost at arbitrary location is established, where the mean and standard deviation quantify the expected traversability cost and associated uncertainty, respectively. A risk term is defined by moment-based Upper Confidence Bound (UCB) and incorporated into a Model Predictive Path Integral (MPPI) controller for risk-aware navigation. Simulation experiments demonstrate navigation success rates exceeding 90\% on different terrains, compared with below 40\% for a baseline, while reducing attitude variations. Furthermore, the proposed approach is validated on a robot traversing real-world off-road terrain.
https://arxiv.org/abs/2610.30839
Reliable robotic manipulation in field-deployed settings requires more than executing a capable controller. As the execution conditions change, the system must decide, online and on the robot side, which control source should hold authority. Human teleoperation adapts readily to contact-rich and semantically ambiguous situations but depends on a stable communication link. Local autonomy is executed without continuous human intervention, but may fail under semantic ambiguity, long-horizon drift, and unforeseen contingencies. These two control sources exhibit complementary reliability profiles. We formulate this complementarity as a control authority routing problem and present Task-Evidence Authority Routing for Robotic Manipulation (TEAR), an edge-deployable framework that allocates authority between human teleoperation and local autonomy. TEAR arbitrates on the robot side using network-state evidence, which governs the usability of teleoperation, and task-semantic evidence, which reflects whether autonomous execution remains consistent with the current task. A lightweight temporal arbitrator observes both forms of evidence together with robot state and current authority to time authority transfers. Across simulated and real-world trials under dynamic network conditions, TEAR achieves task success rates close to pure teleoperation while limiting teleoperation to 19.8-27.4% of control steps and improves success by 30-40% over autonomy-only execution in our settings. These results demonstrate the potential of complementary authority routing to sustain successful manipulation with substantially reduced dependence on continuous human control.
https://arxiv.org/abs/2610.30819
Humanoid motion-tracking policies can reproduce diverse behaviors, yet connecting independently acquired motions into a continuous sequence remains challenging. Interpolation connects boundary poses without considering whether their relative position, heading, and timing provide suitable conditions for a transition. A generative motion prior can produce richer motion, but poorly arranged boundaries may cause it to generate excessive locomotion, turning, or another unintended action. We present Spatio-Temporal Alignment with a Motion Prior (STAMP), a framework for connecting independently acquired humanoid motions through a Robot-to-Human-to-Robot process. STAMP uses human motion space to draw on rich motion priors and reuse transition knowledge across robot embodiments. Its key component is a learned alignment model that determines the boundary conditions for motion inbetweening. Given the two motions retargeted to a human rig, the alignment model ranks candidate positions, headings, and transition durations for the following motion. A human motion prior generates the transition under the selected alignment. The completed sequence is retargeted to the robot and used as a reference to train a motion-tracking policy. We evaluate the tracking success of the generated transitions on Unitree~G1 and~ROBOTIS K1. Physical robot demonstrations further show that STAMP connects independently acquired motions into long-horizon sequences. Project page: this https URL
https://arxiv.org/abs/2610.30817
Loco-manipulation extends the workspace of conventional manipulation by combining mobility with physical interaction, while aerial loco-manipulation further expands this capability into three-dimensional space, enabling robots to reach environments inaccessible to ground-based systems. Moving to an aerial platform, however, gives rise to a demanding control problem, since the vehicle must track trajectories accurately in three dimensions while the motion of the arm and its interaction with the environment continuously shift the center of mass, alter the inertia, and impose force and moment disturbances on the body. Conventional controllers address these effects through explicit models and estimation, whereas learning-based controllers infer dynamics from experience, yet control rewards provide no direct target for the response information retained from history, and fixed task sampling can leave persistent tracking difficulties insufficiently explored. We present ALMA, an aerial loco-manipulation framework for adaptive flight control under external arm commands. ALMA employs a contextual flight policy that adapts from recent measurements and actions, using action-conditioned prediction of future measurement representations to train its context to retain response information relevant to flight control. To expand the experience available for this adaptation, an evolutionary process uses a large language model (LLM) to analyze observed control difficulties and propose new structures of arm motion for subsequent training. In simulation, ALMA reduces position root-mean-square error (RMSE) by up to 24.7% relative to the strongest baseline, while the same policy transfers zero-shot to the aerial manipulator and reduces hover position RMSE by 79.6% during periodic arm motion relative to the real-world baseline.
https://arxiv.org/abs/2610.30810
Flexible endoscopes exploit structural compliance to traverse narrow lumens, pipes, and cavities, where navigation involves distributed environmental contact. This compliance makes tip motion depend on the evolving support configuration. We present external bird's-eye-view contact-aided navigation (EBV-CAN), a vision-language policy that combines one initial global static bird's-eye image with evolving endoscopic observations and motor state. Three supervised semantic queries locate the tip, next waypoint, and instructed target on the cached global image; their residual representations predict bending and insertion commands. We introduce the Vision-Language Contact-Aided (VLCA) dataset, linking 517 demonstrations and 75k action samples to 958k spatial entries and 93k remaining-route records. On 50 held-out episodes, tip-coordinate and waypoint localization reach 97.5% and 94.8%. Swapping the target instruction under identical observations changes target attention and motor output across 17 dual-target episodes. Across 1,920 physical trials of eight policies trained under a shared protocol, EBV-CAN achieves 183/240 successes (76.25%) under automatic blue-area scoring. Gated recurrent unit behavior cloning (GRU-BC) achieves the lowest matched-task offline mean absolute error (MAE), 0.056, and 1/240 physical successes, establishing distinct rankings for action imitation and task completion. Successful multi-guide executions and representative failures connect spatial progress, steering transitions, and visibility to physical navigation.
https://arxiv.org/abs/2610.30786
Modern autonomous Cyber-Physical Systems (CPSs), such as self-driving cars, operate in increasingly complex environments while expected to maintain high reliability. The black-box nature of many of these systems makes it impossible to fully verify their behavior prior to deployment. When a failure occurs, it is important to analyze it to guide improvements to system robustness. A recent work introduced the novel concept of leveraging the framework of actual causality for CPS failure explanation. However, that work considered only a discrete, binary causal model that cannot capture continuous changes in system inputs. In this paper, we address these limitations by extending the actual causality framework with the notion of distance to account for the continuous characteristics of the system. Specifically, we introduce the novel concepts of distance-weighted actual cause and distance-weighted degree of responsibility, enabling causal influence to account for the magnitude of changes required to avoid a failure, rather than only its cardinality. While motivated by the continuous nature of CPSs, this constitutes a general extension of the theory of actual causality and enables more fine-grained analysis of continuous inputs in any causal model. Building on these notions, we present an efficient, practical, system-agnostic explanation-derivation algorithm that uses distance-weighted responsibility to guide the explanation search. We experimentally evaluate our approach across a number of environments from two autonomous-driving simulators with black-box neural controllers. The results show that the proposed extension provides more effective guidance than the current discrete approach.
https://arxiv.org/abs/2610.30737
Flow matching is now the dominant approach for vision-language action (VLA) robot policies, thanks to its expressiveness and simple training objective. However, inference for standard flow matching requires iteratively solving an ODE, limiting the control frequency at deployment. While several works have proposed novel methods to allow for single-shot action generation, we ask whether such additional objectives are actually necessary. We find that across six flow matching VLAs, one-step action generation largely matches multi-step sampling at scale: multi-step integration confers little to no consistent advantage at inference. We empirically find that this holds as long as models are sufficiently trained and have enough capacity. Practically, the implication is that for large VLAs, the single-step policy comes essentially for free from the multi-step model, enabling low-latency deployment without retraining, distillation, or auxiliary objectives.
https://arxiv.org/abs/2610.30735
Autonomous robotic surgery has drawn increased attention in recent years due to its potential to relieve surgeons of time-consuming, mentally straining, and tedious tasks, particularly during prolonged operations. One suitable task for automation is suturing, which involves tracking the thread as it deforms during needle retrieval, de-tangling, knot tightening, and other tasks. Unlike rigid-object manipulation, deformable thread manipulation has no fixed pose to track and effectively infinite degrees of freedom, making its configuration difficult to predict and requiring the thread's state to be re-estimated rather than assumed. At the same time, thread manipulations involve sequential motions that depend on past and current thread contact points, which must be accurately and continuously tracked. This paper presents an image-to-manipulation pipeline that concurrently generates live thread reconstruction while conducting safe and optimized sequential manipulations to achieve long-horizon tasks.
https://arxiv.org/abs/2610.30694
Visual Language Action (VLA) models are designed to be generalist robot models that can be implemented across embodiments, tasks and environments. However, their ability to collaborate with other robots and humans remains underexplored. In this work, we propose a framework to automate the generation of multi-robot collaborative data for decentralized VLA training without requiring human teleoperation. Our framework first utilizes a decentralized collaborative planning approach to generate multi-robot collaborative robot plans in the form of an executable function. We then utilize the collaborative plan to produce collaborative demonstration data to finetune VLA models in a decentralized manner. We show that our approach produces demonstration data that when used to finetune VLA models on decentralized collaboration tasks matches the task performance of VLA models finetuned on human-teleoperated collaborative data.
https://arxiv.org/abs/2610.30671
Motion planning is central to robotics, and it is increasingly used to correct the motions proposed by learned planners and policies. In both uses, constraints must hold at every instant of the motion, not only at sampled times. To our knowledge, no algorithm provably converges to a globally optimal motion once a smoothness cost is combined with such constraints. We cast planning and steering as a single continuous-time program: robots avoid one another and static or moving obstacles, and a learned proposal is steered by keeping the motion close to it. The program is elementary to state, yet nonconvex. We propose GlobMP (Global Motion Planning), a gradient projection method over piecewise-polynomial curves, on which each constraint is one polynomial per piece that must stay nonnegative over the whole motion; it alternates cost reduction with feasibility restoration. Under mild assumptions, we show that, from a fine grid start, its cost approaches the global optimum as the number of polynomial pieces grows, with every constraint met to any chosen tolerance, or exactly on stable instances. We demonstrate its superior performance over strong baselines in real and synthetic experiments, including teams of up to $200$ robots, multi-robot planning on the Robotarium testbed and an extended benchmark, maze navigation, and steering tactile-reactive policies on a bimanual humanoid.
https://arxiv.org/abs/2610.30607
Dynamic interactive object search in large-scale human environments presents substantial challenges for existing methods. Current scene representations like 3D Scene Graphs (3DSG) only provide coarse-grained spatial segmentation and cannot identify functional areas such as storage or leisure areas. Without functional area understanding, existing methods are constrained to exhaustive sequential exploration at large scales, resulting in inefficient search behaviors -- particularly in open-layout environments with numerous interactive objects such as drawers and cabinets. Moreover, these methods lack adaptability to environmental dynamics such as object relocations. To address these limitations, this paper proposes CMAR-search, a novel framework built upon Commonsense and Memory Augmented Reasoning (CMAR). Our approach leverages commonsense about area functionalities and aggregates environmental memory to construct a Functional 3D Scene Graph (F3DSG), which organizes the environment into functional areas with their associated containers. Through this structured representation, CMAR enables hierarchical action planning at both macro-area and micro-container levels, empowering the system to efficiently identify and inspect semantically relevant areas for effective object search. Notably, CMAR continuously integrates real-time perception, accumulated memory, and commonsense to dynamically relocalize objects in changing environments. Extensive experiments in simulation and real-world settings demonstrate that CMAR-search significantly surpasses state-of-the-art baselines in both success rate and search efficiency for object search in dynamic interactive environments.
https://arxiv.org/abs/2610.30606
Traversability estimation is critical for ground vehicle teleoperation, yet existing methods often neglect the human operator's preferences for speed and risk tolerance. To address this gap, we propose PATH-Net, a Preference-Aware Traversability estimation Hierarchical Network that adaptively generates preference-conditioned traversability cost maps and speed profiles for off-road teleoperation. Our framework integrates visual and geometric bird's-eye-view features with short-term historical vehicle states through a multi-head shared-backbone architecture. Our PATH-Net infers traversability cost maps while optimizing speed recommendations by using maximum entropy inverse reinforcement learning and sparse speed supervision. Our method incorporates operator preference via an asymmetric feature aggregation mechanism, splitting inference into a cost branch that prioritizes high-risk traversability regions and a speed branch that outputs preference-adjusted recommended speeds. Experiments with 15 operators across 225 teleoperated trajectories show alignment with user-specific navigation strategies, achieving modified Hausdorff distance of 0.17 m (aggressive) and 0.15 m (conservative). In the questionnaire assessment, participants reported lower NASA-TLX workload scores with PATH-Net recommendations than without recommendations, decreasing from 34.7 to 22.2. These results support preference-conditioned trajectory and speed recommendation for off-road teleoperation.
https://arxiv.org/abs/2610.30605
Reliable robotic mapping in dynamic real-world environments is essential for embodied intelligence and long-term autonomy. However, existing methods often involve a trade-off: lightweight online mapping is efficient but captures limited semantic context, while dense mapping provides richer semantics at higher computational cost and is more vulnerable to distractors. They also struggle to relocalize objects after scene changes. To address these challenges, we propose the Online Anchor-centric Scene Inference System (OASIS), a unified system for online mapping, complex open-vocabulary retrieval, and navigation in dynamic environments. Motivated by the observation that indoor scenes are organized around stable semantic anchors, OASIS represents the environment using a sparse set of anchor nodes, each maintaining a unified multimodal representation that integrates semantic descriptions, visual features, and geometric states for reasoning, verification, and navigation. Its compact anchor-centric memory supports on-demand evidence extraction and hierarchical retrieval, reducing redundant storage while improving retrieval reliability. To handle scene dynamics, OASIS further reuses transient observations collected during navigation to relocalize moved objects. Experiments in both simulation and real-world environments, including standard retrieval benchmarks and navigation tasks under both static and dynamic settings, demonstrate that our system can perform complex open-vocabulary retrieval and navigation, while also enabling relocation of displaced objects after scene changes.
https://arxiv.org/abs/2610.30589
Recent advances in foundation-model agents have enabled increasingly capable embodied systems for long-horizon planning and interaction. However, embodied agents require fast, closed-loop decisions as they continuously perceive and act on a changing environment. Deploying strong cloud agents leaves the platform idle for seconds between consecutive actions, while lightweight local models respond quickly but are more vulnerable to errors. Existing hierarchical architectures typically assign models fixed roles, whereas conventional model routers make stateless per-request decisions. We present CARE, a critic-guided adaptive execution framework that dynamically determines when to escalate control from a local executor to a stronger cloud model. A lightweight critic model monitors execution reliability and triggers escalation when local execution becomes unreliable; once escalated, control persists until the agent recovers, avoiding step-wise switching. To support such control transfer, a shared handoff memory maintains execution context and task-level progress across executors, enabling the model to intervene without restarting from scratch. Across diverse embodied benchmarks, CARE improves task success by 6.3-18.3 percentage points over the strongest evaluated collaboration baseline. CARE further approaches or exceeds Cloud-only success while reducing median time-between-action latency by 28.8-82.6%.
https://arxiv.org/abs/2610.30587
Human motion retargeting bridges the embodiment gap between humans and humanoid robots by converting human demonstrations into reference trajectories for whole-body control and loco-manipulation. For object-interaction tasks, successful execution depends on accurately preserving body--object relations at critical stages. However, uniform per-frame iteration budgets do not account for these localized accuracy requirements, limiting the computational efficiency of retargeting. To address this limitation, we present Spatiotemporal Retargeting (STR), which uses keyframes and key body parts to allocate optimization effort. Specifically, a vision-language model selects relevant motion signals and body parts, and keyframes are identified from changes in the selected signals. Based on these selections, STR assigns additional solver iterations to keyframes and higher interaction weights to the selected parts. To further improve contact fidelity, we introduce Mechanics-Aware Contact Anchoring (MCA) to refine object-surface contact positions using an approximate object-wrench model while retaining the selected surface directions. Building on the resulting references, we develop Spatiotemporal Reinforcement Learning (STRL), which combines adaptive key-stage sampling with a contact reward based on target proximity and object contact forces for downstream control. Simulation experiments on a Unitree G1 and real-world experiments on a Unitree R1 demonstrate that STR improves geometric contact coverage and continuity at lower computational cost, while the resulting references improve downstream task completion across diverse object-interaction motions.
https://arxiv.org/abs/2610.30540
Predicting surrounding vehicles' lane-change intentions enables autonomous vehicles to anticipate potential hazards and respond proactively rather than relying solely on reactive maneuvers. This study investigates the benefits of integrating lane-change prediction, based on knowledge graph embeddings and Bayesian inference, into autonomous vehicle decision-making. Three driving strategies are evaluated in risky merging scenarios simulated in CARLA: reactive driving, prediction-based longitudinal action, and prediction-based lateral action. The proposed prediction model anticipates the surrounding vehicle's lane change approximately 3-4 seconds before its occurrence, allowing the ego vehicle to adjust its behavior accordingly. In the representative simulation records, reactive driving results in a collision accompanied by aggressive deceleration. In contrast, prediction-based longitudinal action initiates early braking to establish a safe gap, while prediction-based lateral action performs a lane change when a safe adjacent lane is available. Both predictive strategies avoid collisions in the evaluated records. Compared with reactive driving, peak deceleration before impact is reduced by 31.5% with longitudinal action and 91.0% with lateral action. Additionally, an ISO 2631-1-based horizontal vibration estimate is used to provide a ride comfort assessment. Overall, the results highlight the potential of lane-change prediction to support safer and smoother driving through proactive decision-making, with additional insights into ride comfort provided by vibration-based estimates.
https://arxiv.org/abs/2610.30528
Motion Diffusion Models (MDMs) can generate diverse and visually appealing human motion; yet, the resulting trajectories frequently violate physical constraints, limiting their downstream use in simulation and control. We present PhysibleMDM, a framework that promotes physical feasibility of MDM output by optimizing at inference time the diffusion noise without retraining the generative model. We introduce a set of surrogate feasibility constraints that can be evaluated without full trajectory simulation. These constraints combine kinematic checks (e.g., ground penetration, slip, and self-collision) with dynamic feasibility tests computed via an inverse-dynamics inner loop formulated as a cone program. We solve the resulting black-box noise optimization problem using the Separable Covariance Matrix Adaptation Evolution Strategy (Sep-CMA-ES), thereby avoiding reliance on computationally expensive and discontinuous gradients. An autoregressive scheme then chains optimized segments to synthesize long motion sequences. Across 100 motion styles on an SMPL humanoid, PhysibleMDM reduces mean ground penetration, self-collision penetration, and ground slip by 75%, 92%, and 74%, respectively, relative to unoptimized diffusion output. Across 11 sequences for a custom bipedal robot, it achieves median reductions of 89.5% in per-sequence mean acceleration-reconstruction error and 79.5% in the mean inverse-dynamics residual.
https://arxiv.org/abs/2610.30500
Should an embodied agent's experience be baked into its policy weights, or kept external and retrieved at inference? A memory-augmented teacher (a VLM that retrieves lessons, with their episode images, from its own past attempts) produces trajectories on a vision-conditioned reach task; from the same trajectories we distil LoRA student policies and evaluate them under matched protocols, including one that re-attaches the teacher's frozen retrieval buffer to a fixed set of student weights. We pre-registered the hypotheses, arms, tests, and analysis rules before training and before any p-value. Distilling the memory-augmented behaviour into weights beat an action-only control by +1 pp (n.s.); the registered test proves underpowered for its own minimum effect, so we withdraw - rather than refute - the memory-in-weights claim. Attaching retrieval to a fixed set of student weights added +34 pp (z=5.15), reaching the pooled memory-augmented teacher reference (49.3%); the pre-registered protocol contrast agrees (+23 pp, z=3.36); under a pre-registered auto-reset sensitivity count the two are +36 and +29 pp. An exploratory behavioural probe with pre-registered per-arm predictions is consistent with behavioural distillation transferring the marginal correction but not the conditional, situation-specific correction that retrieval supplies. The recipe that follows is to externalise the memory: in follow-up controls registered before they ran, the same frozen buffer lifts the base model with no adapter to 48% (sensitivity 48%) and the other three adapters from 19-26% to 53-55% (sensitivity 17-21% to 50-55%), and the adapter adds nothing detectable once the buffer is attached. On a second, harder task, the retrieval advantage points the same direction but falls short of significance (+6 pp, 95% CI [-4.5, +16.4]); exploratory diagnostics tie the attenuation to memory coverage.
https://arxiv.org/abs/2610.30478