Estimating propeller rates from a moving event camera requires separating blade rotation from the changing image geometry. Background activity mixes with blade events, while repeated blade appearances admit half- and double-rate ambiguities. We propose CoHelix, a recursive filter that estimates one shared homography and separate rotation states for four rigidly mounted, coplanar propellers. Each admitted event updates its assigned rotation state, and its accepted geometry measurements correct the shared homography used to interpret later events from every propeller. We report lock, the fraction of evaluated time for which an estimate remains within 2% of synchronized ground truth, because mean error alone does not show how long a tracker follows the true rate. With fixed-rate initialization, leave-one-recording-out evaluation on moving-camera data gives CoHelix 62.9% lock, compared with 39.8% for HelixTrack and 22.2% for EventPro. With other settings fixed, allowing four geometry contributors instead of one raises lock from 3.4% to 62.9%. On a private target-follower dataset with a different target quadcopter, CoHelix retains the measurement settings selected on moving-camera data and uses a fixed initial rate. It reaches 95.9% lock, compared with 56.2% for HelixTrack and 61.1% for EventPro.
https://arxiv.org/abs/2610.31384
Robotic swarms must coordinate across diverse missions, yet existing controllers often require redesign, retuning, or retraining when objectives change. Here we show that probabilistic energy modeling provides a unifying representation for versatile swarm control, in which diverse missions emerge from compositions of shared interaction principles rather than task-specific control formulations. By exploiting the correspondence between Gibbs random field energy minimization and structured reward maximization, we encode fundamental swarm behaviors as reusable energy terms within a unified probabilistic objective. Decentralized policies trained within this representation are composed into a single controller through lightweight policy gating, without retraining. An interpretable action-attention mechanism captures non-uniform local interactions, while dimensionless normalization supports transfer across swarm scales and platforms. Demonstrated on aerial swarms, the unified policy generalizes zero-shot across six mission classes, 10-100 agents, two hardware platforms, and indoor cluttered and GPS-denied woodland environments. Large-scale simulations achieve 0.96-1.00 task success rates with 1-10 ms per-agent inference latency, while physical deployments confirm zero-shot transfer to real platforms and unstructured environments. These results establish probabilistic energy modeling as a scalable and transferable framework for decentralized swarm control.
https://arxiv.org/abs/2610.31371
Vision and touch provide complementary cues for object pose and local contact geometry, but external cameras are often occluded at the contact site. We present GelSlim 5.0, a fingertip sensor that acquires visual and tactile observations with one fixed camera and a continuous UV-responsive contact layer. By switching illumination, the camera sequentially acquires through-membrane visual images and contact-sensitive tactile images from a shared viewpoint, avoiding inter-camera extrinsic calibration. To combine these observations, we introduce VisTacFusion, a multimodal transformer with separate prediction paths for planar object pose and contact geometry. Asymmetric bottleneck fusion incorporates visual context while preserving tactile spatial features for depth and surface-normal estimation. Modality dropout enables inference with paired inputs or either modality alone. On real validation data from 12 known objects, paired inputs reduce depth MSE, angular error, and translation $L_1$ by 61.2%, 72.3%, and 61.3%, respectively, relative to tactile-only inference with the same model. Relative to visual-only inference, the corresponding reductions are 93.7%, 6.1%, and 8.6%.
https://arxiv.org/abs/2610.31334
Exoskeletons have shown great potential for augmenting human physical capabilities, yet generating reliable assistance remains challenging because human motion patterns and interaction requirements vary substantially in practice. To address this problem, a dual-loop assistance strategy is proposed to couple multimodal exoskeleton trajectory generation with variable admittance control, where trajectory variance links the outer-loop generator and the inner-loop controller. The generator synthesizes future exoskeleton trajectories through denoising, primarily using whole-body human motion and exoskeleton proprioception, with task descriptions as auxiliary semantic cues. To reduce cross-modal representation mismatch, a three-stage training pipeline is introduced to progressively optimize the human motion encoder, the exoskeleton proprioception encoder, and the trajectory generator. In the inner loop, multiple future trajectories are sampled from the generator to estimate the trajectory mean and variance. The mean is used as the control reference, while the variance provides an uncertainty measure for prediction reliability. This measure is further incorporated into a stiffness regulation law, enabling compliant assistance with input-to-state stability under bounded lumped interaction input. Experimental results demonstrate that the proposed method significantly reduces muscle activation levels compared with standard baselines, while also decreasing users' metabolic energy expenditure relative to the unassisted condition.
https://arxiv.org/abs/2610.31302
Real robot data, rich across tasks and morphologies, is often treated as the bottleneck for training robot learning models, including embodied foundation models that aim for zero-shot physical transfer. In this paper, we investigate the degree to which such models can acquire necessary structure using data from systems without embodiment. To this end, we test if inexpensive, procedurally generated synthetic data can yield useful priors before a model observes any real-world behavior. We study this through robot action prediction, a natural pretraining objective and a direct test of whether structure learned from arbitrary synthetic tasks transfers to embodied settings. We introduce three data generation pipelines that model mathematical abstractions of robotic control, and use them as pretraining priors for a Transformer. We demonstrate that a model trained purely on this non-robotic data attains non-trivial zero-shot prediction performance on unseen physical robot tasks via an in-context learning mechanism, and that our specialized control priors notably improve upon generic causal priors. We also compare against a compute-matched baseline trained on real robot data, and find that it outperforms our model but only on the datasets it was trained on. These findings suggest that procedurally generated, mathematical abstractions can yield useful robotic priors, offering a potential complement to expensive embodied data collection.
https://arxiv.org/abs/2610.31275
Multi-robot SLAM allows robots to improve their estimates by exchanging map information, but repeated exchanges create unknown correlations between local estimators. Covariance intersection (CI) can fuse estimates without tracking these correlations. In right-invariant extended Kalman filter (RI-EKF) SLAM, however, point features obtain their invariant errors through the robot rotation, so a neighbor's map estimate is expressed in its own error coordinates and is correlated with its pose, and cannot be fused by CI directly. This paper presents Joint-CI, a unified fusion method for distributed RI-EKF SLAM with point, object, and mixed point--object maps. Using a neighboring robot's local posterior and an inter-robot observation, a joint estimate of the receiving robot's pose and the common features is constructed in the receiving robot's error coordinates, retaining the robot--feature and feature--feature correlations. Partial-state CI then fuses this estimate with the receiving robot's local posterior. We show that the unified formulation and the fusion preserve the six unobservable directions associated with global rotation and translation, and that communication and fusion preserve first-order covariance consistency given consistent local posteriors. Monte Carlo simulations and a real-world dataset-derived experiment show that Joint-CI improves estimation accuracy while maintaining consistent, mildly conservative uncertainty.
https://arxiv.org/abs/2610.31221
Recent magnetometer-free inertial measurement unit (IMU) methods can reduce drift in joint motion estimation using rigid-body constraints, but they typically require pre-calibrated sensor locations, assumptions of specific joint models (e.g., hinge joints) or limited motion types, or an external reference for global orientation. Furthermore, challenges related to high-frequency impacts (e.g. at foot strikes during gait) and numerical differentiation of noisy measurements have not been explicitly addressed. We propose an extended Kalman filter that estimates relative IMU orientation and sensor location simultaneously, requiring neither offline sensor location calibration nor a global orientation anchor. A systematic simulation study shows that the quality of the relative orientation and the sensor location estimates depends on different motion-intensity sources: the joint center acceleration and the relative angular velocity, respectively. A low-pass filter (LPF) is used to mitigate real-signal outliers before applying the rigid-body constraint. When applied to the OpenSense dataset with real IMU measurements across four subjects with three lower-body joint types during walking and complex tasks including various motion types, the proposed method achieves an overall relative orientation error of 2.61°, compared with 10.40° for a baseline using offline-estimated sensor locations and 7.43° for a baseline using marker-derived sensor locations. These results show that the proposed calibration-free estimation framework handles real IMU data effectively and achieves accurate relative orientation without offline sensor location calibration.
https://arxiv.org/abs/2610.31156
Generated robot videos can look convincing while depicting the wrong interac- tion: a different object is moved, a grasp disappears, or a placement ends out- side its destination. We introduce RGraph-Eval, a reference-based framework that makes these discrepancies explicit through task-grounded temporal scene graphs. Unlike approaches that construct separate evidence representations for different evaluation dimensions, we organize task entities, interactions, and motion within a unified, interpretable scene graph representation. A foundation-model pipeline identifies manipulation roles, grounds persistent object masks, infers and verifies state transitions and action intervals, and reconstructs manipulated- object motion in three dimensions. Applying this representation to a generated video and a reference demonstration supports an interpretable RGraph-Eval score with visible-object, relation-change, and 3D path-shape components. We also introduce ShareRobot-SG, a collection of 1,000 manipulation scenes from ten ShareRobot sources annotated with the multimodal representation. Our eval- uation separates graph-generation quality from agreement with human video judgments, and includes comparisons with adapted SVG2 and SG-Ego, a bench- mark of three video generators. The framework connects robot-video assessment to the observable entities and interactions underlying a task, while making the graph annotations reusable beyond evaluation. Code will be publicly available at this https URL.
https://arxiv.org/abs/2610.31121
Diffusion trajectory planners with domain-specific experts face a practical question in unseen regions: can they rely on selecting among existing experts, or must the planner itself adapt? We study this question using a planner with a shared adapter and per-domain expert adapters. Across three real-world held-out maps, none of eight test-time routing schemes improves the fleet-mean lateral offset over the static default, which uses the same expert for every scene. Even an oracle that selects the best expert for each scene reduces the mean offset by only 0.9 m. In contrast, reward-based fine-tuning on just 20 target-region scenes yields substantially larger gains. On matched evaluation slices, joint replay achieves a fleet-mean offset of 6.9 m, compared with 12.4 m for the static default. Comparisons under the same target-region training budget show that target-region training drives the improvement, while replaying training scenes limits forgetting on the original ODDs. On nuPlan, fine-tuning across training cities also improves open-loop offsets, although closed-loop performance deteriorates. Further diagnostics reveal that two test-time adaptation baselines achieve low offsets by producing degenerate trajectories. These results show the limited headroom for selecting among existing experts and the greater open-loop gains available from adapting the planner.
https://arxiv.org/abs/2610.31095
Capturing a loose object inside a spacecraft requires a robot to approach a target that can translate and rotate, and whose motion changes when contact is made. These conditions motivate evaluation beyond manipulation of supported objects. We introduce AstroBench, an open benchmark for free-floating capture and space robotic manipulation with a fixed-base arm. The task suite combines four initial-motion tracks with sample-storage operations based on MELFI hardware and cap and captive-screw servicing based on the Robotic Refueling Mission. The two workcells provide nine task definitions and 29 task-target combinations. A metadata-filtered Objaverse inventory supplies 8,414 object instances for asset expansion, alongside five cabin visual contexts and versioned task instructions. We report two acquisition-focused experiments using existing checkpoints. A frozen $\pi_{0.5}$ DROID joint-position policy captures 2 of 200 static targets and 4 of 200 moving targets across twenty object identities. A cube-specific ACT policy captures 8 of 10 static targets and 6 of 10 moving targets in a separate experiment. Each experiment retains its recorded observation, action and capture configuration. The results document difficult direct transfer for the tested generalist checkpoint and successful task-specific capture behavior, while identifying concrete settings for studying motion-aware perception and contact-sensitive control. Code, task definitions and editable workcell assets are available at this https URL.
https://arxiv.org/abs/2610.31064
Tilt-rotor quadcopters redirect thrust for translation without banking, but complicate modeling, state estimation, and disturbance rejection. This paper presents a simulation-based flight stack for a \SI{2.00}{\kilo\gram} tilt-rotor quadcopter. The system uses a six-degree-of-freedom nonlinear model with first-order motor dynamics and two-axis rotor tilt, parameterized using a 3D CAD model. A cascaded PD controller commands forward and lateral tilt angles. A 14-state EKF fuses sensor data across hover, early-transition, and transition modes using a hysteretic (Schmitt-trigger) classifier to prevent covariance discontinuities. Because the proportional position loop leaves a steady-state offset under constant wind, a small bounded neural residual is added on top of the unmodified PD controller. It is trained by behavioral cloning from a teacher with privileged access to the true wind, while the deployed network never observes wind. In simulation, the EKF achieves a post-settling position root mean square error (RMSE) of \SI{0.226}{\metre} (horizontal) and \SI{0.03}{\metre} (vertical) and an attitude RMSE below \SI{0.8}{\degree}, and it estimates a wind velocity of $(\num{2.0}, \num{-1.2})\,\unit{\metre\per\second}$ to within \SI{0.15}{\metre\per\second} per axis. The residual reduces steady-state station-keeping error under wind by approximately \SI{49}{\percent}, from \SI{0.117}{\metre} to \SI{0.060}{\metre} at \SI{1.5}{\metre\per\second} and from \SI{0.319}{\metre} to \SI{0.162}{\metre} at an out-of-distribution \SI{3.9}{\metre\per\second}. The framework provides a basis for hardware-in-the-loop and flight-test studies.
https://arxiv.org/abs/2610.31051
Flexible robotic endoscopes provide access through tortuous anatomy, where friction, deformation, and wall interaction separate commanded insertion from useful distal progress. Operators interpret this mismatch and retreat to recover a navigable configuration. Recognizing the approach to that decision requires relating motor intent to distal response and the local visual scene. We introduce Multimodal Progress-Residual Fusion (MPRF), a causal model that anticipates operator retreat from commands, electromagnetic (EM) tracking, and endoscopic video. A nominal-progress model predicts the response expected in normal or successful navigation; a temporal predictor combines its EM residual with all three observed modalities. In a 150-episode colon-phantom collection, MPRF achieves 0.580 +/- 0.007 AUPRC across three seeds, compared with 0.511 for the strongest reduced-modality control. Complete multimodal histories provide the principal ranking advantage, while the residual adds an explicit intent-response representation with a small, uncertain increment over raw fusion. Analysis of frozen alarms relates warning timing to the behavioral label and explains the increase in event recall under a longer matching window. These results establish a basis for behavioral assistance during operator-controlled navigation.
https://arxiv.org/abs/2610.31028
This paper presents a demonstration-based robotic feeding framework that integrates human demonstration, Dynamic Movement Primitive-based motion planning, vision-based scene perception, and robot control. A human operator first demonstrates the scooping and feeding motions while the position and Euler-angle orientation of the spoon are recorded using a motion-capture system. The recorded trajectory is segmented into scooping and feeding motions, which are encoded using separate Dynamic Movement Primitives. Before task execution, an RGB-D camera estimates the participant's mouth position, while two AprilTags are used for robot-frame registration and tray localization. The detected tray pose is used to position the scooping motion, whereas the detected mouth position defines the positional goal of the feeding motion. The approach, scooping, and feeding trajectories are then executed sequentially by a Kinova Gen3 manipulator through a ROS~2-based framework. A real-world experiment demonstrates the feasibility of the integrated pipeline and shows that the learned spoon motions can be reproduced within the detected experimental scene.
https://arxiv.org/abs/2610.31020
Natural-language interfaces allow users to command robotic systems without interacting directly with mission planners or robotics middleware. Their reliable use depends on robot tool routing, defined here as the selection of the smallest complete subset of predefined executable capabilities required to satisfy a request. This task is particularly difficult for compound instructions, where incomplete selection may omit necessary sensing or monitoring capabilities, while excessive selection may expose irrelevant tools. We compare four routing strategies: three progressively refined ChromaDB-based methods - fixed-threshold retrieval, relative-distance retrieval, and clause-aware aggregated retrieval - and a cloud-hosted 120-billion-parameter language-model baseline. The methods are evaluated on 164 manually annotated prompts organised into three complexity levels, from direct single-tool requests to compound requests requiring at least three tools. Using exact-match accuracy, completeness, precision, a completeness-weighted composite score, and routing latency, CDB-v3 achieves the best macro-average score among the retrieval-only methods, with 0.7822, compared with 0.8869 for the large-model baseline. Although the LLM provides higher routing quality, CDB-v3 exhibits substantially lower latency and can be deployed locally without requiring cloud connectivity. These results identify a quality-latency trade-off between direct large-model selection and clause-aware semantic retrieval for privacy-sensitive, connectivity-constrained, and resource-constrained robotic systems.
https://arxiv.org/abs/2610.31013
This paper presents TRACE, a traversability-aware reactive navigation framework designed for the autonomous operation of ground robots in unstructured forest environments. Unlike traditional approaches, TRACE leverages VLM-based confidence maps from positive and negative natural-language prompt sets and combines them through evidential fusion to produce a dense traversability map that prioritizes the terrain based on signs of previously traversed paths. Traversability-annotated points are then extracted and used to derive the left and right boundaries of the traversable path via percentile binning followed by spline or regularized polynomial fitting. These boundaries are then incorporated as soft barrier constraints within an NMPC formulation, enabling safe and adaptive path following in complex natural environments. Rigorous experimental trials carried out in real-life forest environments demonstrate TRACE ability for smooth navigation in cluttered, deformable, and visually ambiguous terrains.
https://arxiv.org/abs/2610.30994
Robot demonstrations record what the robot saw and what it did. They do not specify how the 3D world changed in between. Scene-level 3D flow describes it by tracking 3D scene points, providing the world representation with 4D geometry. Prior work has used flow to improve robot policies. Flow served as an intermediate prediction that a separate model converts into actions, as a prior injected at inference time, or as an extra output learned together with the action. In all of these designs, flow stays outside the policy, as a separate module or as an extra prediction head. We introduce UniFlowWAM, a Unified World-Action Model that makes 3D scene flow a third modality on par with vision and action. Its world representation therefore covers both visual semantics, through future visual features, and 4D geometry, through 3D flow, and flow receives its own supervision. UniFlowWAM is a diffusion transformer with one expert per modality, and the three experts exchange information through joint attention. We train UniFlowWAM under a ten-objective role grid, where each objective assigns every modality exactly one of three roles, namely target, condition, or absent. The same model thus serves as a policy, as forward and inverse dynamics, and as a predictor of future visual features or 3D flow. We evaluate UniFlowWAM on RoboCasa-GR1, LIBERO, and LIBERO-Plus in simulation, and on four real-world bimanual manipulation tasks. On RoboCasa-GR1, UniFlowWAM raises the success rate of its base model without flow from 52.1% to 56.4%. It preserves in-distribution success on LIBERO at 98.1% and reaches 87.7% zero-shot on LIBERO-Plus. On the real robot, it achieves 87.0% average success, compared with 68.5% for the strongest baseline.
https://arxiv.org/abs/2610.30991
Robust manipulation of soft objects, such as garments, is a critical skill for service and household robots to adopt, but remains challenging due to its high-dimensional state space, and material-dependent deformations. Humans address this challenge by using mental world models that "imagine" the shape and material properties from partial observations, which enables them to predict how actions affect future states. As such, embedding such world models in robots allows for better generalization in manipulating a wide variety of garments in the real world. However, learned world models typically require large amounts of real world data that is strenuous to collect, and a mechanism to infer latent properties that govern dynamics. We present a Soft-Object World Model that performs generative full-state estimation and action-conditioned dynamics prediction using a transformer backbone trained on large-scale simulated soft object interactions, with measures to mitigate the sim-to-real gap. By learning to infer latent shape and material cues through in-context learning over a variable-length partial point-cloud history, the model generalizes across robot embodiments, material parameters, garment types and shapes, and manipulation coordination modes without weight updates. The world model is then integrated with a Goal-Conditioned action planner for motion synthesis. We validate the approach in simulation and real world for bimanual garment folding, reporting improvements in reconstruction fidelity, prediction accuracy, and task success.
https://arxiv.org/abs/2610.30988
Vehicle-to-everything (V2X) communication enables connected vehicles to make safety-critical decisions, but delayed, missing, or incorrect information can compromise driving safety. Systematically testing such failures is challenging because traffic interactions, communication conditions, and application responses must be jointly configured to produce meaningful scenarios. This paper presents LAST-V2X, a language-driven, adaptive framework for automated scenario synthesis and safety testing of V2X applications. LAST-V2X leverages large language models (LLMs) to translate natural-language test descriptions into executable scenarios grounded in roadway geometry, V2X communication semantics, and vehicle behavior. The framework integrates physical traffic simulation with spatially aware communication modeling and message-level fault injection to evaluate how information degradation affects vehicle decisions. To establish whether an observed safety failure is caused by communication rather than the underlying traffic conditions, LAST-V2X employs matched executions under degraded and ground-truth information. Furthermore, an execution-guided refinement mechanism combines parameter search and LLM self-reflection to identify ineffective test configurations, improve scenario effectiveness, and produce minimal reproducible failure cases. Experiments across diverse CARLA environments and V2X safety applications demonstrate the framework's ability to generate reliable scenarios, distinguish communication-induced failures from unrelated safety violations, and substantially improve failure discovery through adaptive refinement. These results establish LAST-V2X as a systematic approach to language-driven, causally verified, and adaptive safety testing for connected vehicle systems.
https://arxiv.org/abs/2610.30979
Stable grasping under task-specific disturbances is important for robotic manipulation. However, most dexterous grasp synthesis methods are developed for highly actuated hands in free space, and low-DoF hands may not be able to realize the contact topologies required by these grasps. Meanwhile, support surfaces can provide useful contact forces, but are often treated only as geometric constraints. We present a support-aware grasp synthesis framework for object immobilization with low-DoF coupled hands. Given irregular object geometry, our method represents both hand and object local surface regions as graphs and searches for kinematically feasible matchings between them. We then refine the wrist pose and motor state for geometric contact feasibility and validates the refined grasps through physical rollouts. Starting from the validated grasp pose, an optional task-guided local search explores nearby grasp configurations by varying the wrist pose and motor state, and selects one according to the specified task condition. Experiments on diverse objects show that our method generates various grasp configurations that achieve high grasp success and strong disturbance resistance. Real-world experiments further demonstrate physically executable grasps which enable object immobilization in cooking scenario.
https://arxiv.org/abs/2610.30969
Assistive devices for patients with neurodegenerative movement disorders must combine high mechanical transparency with the ability to generate corrective interaction forces. Achieving both properties simultaneously remains challenging. This paper presents the completed iAssistADL platform, a 3-DoF assistive device for future tremor and ataxia compensation during activities of daily living. The system employs a transparency-oriented mechanical architecture with all actuators located at the base, resulting in low moving mass, decoupled kinematics, and high mechanical transparency. To compensate for friction-induced transparency limitations along the vertical axis, a hybrid control strategy is proposed that combines open-loop force rendering in the horizontal plane with closed-loop force control in the vertical direction. The platform is experimentally evaluated through transparency measurements and static and dynamic force-rendering experiments at representative configurations. Results demonstrate resistive torques below 0.1 Nm in the horizontal plane, end-effector forces of up to approximately 10 N throughout the workspace, and accurate horizontal force rendering up to 4 Hz. While the vertical axis remains limited by friction-induced dynamics at higher frequencies, the proposed system successfully combines high transparency with controlled force generation, establishing a promising hardware platform for future tremor and ataxia compensation.
https://arxiv.org/abs/2610.30955