The development of intelligent chassis increasingly requires the integration of environmental and perception information with high-fidelity vehicle dynamics to support environment-aware intelligent chassis control. However, existing autonomous-driving simulators and professional vehicle-dynamics tools are generally developed for different purposes, making it difficult to integrate environmental information, vehicle dynamics, and chassis algorithms. This paper proposes EViDS, an Environment-Vehicle Dynamics Integrated Simulation Platform for Intelligent Chassis Development. EViDS integrates CARLA-based environment and sensor simulation with CarSim-based high-fidelity vehicle dynamics. Reference-pose-based state alignment and multi-rate interaction maintain spatial and temporal consistency, while ray-casting-based tire-road interaction transfers environmental information to the vehicle-dynamics model. Scenario configuration, synchronized data acquisition, and algorithm interfaces further support intelligent chassis development. The platform is evaluated through environment-dynamics interaction tests with vehicle-dynamics consistency comparisons, together with intelligent chassis applications. Results show that EViDS preserves vehicle-dynamics characteristics, reliably transfers environmental information, and supports online closed-loop intelligent chassis control, providing a unified simulation basis for environment-aware intelligent chassis development and validation.
https://arxiv.org/abs/2611.17660
Personalized bioelectronic devices for wound therapy require not only conformal fabrication on complex body surfaces but also functional adaptation of their electrical characteristics to individual wound geometries. Here, we present an AI-guided robotic in situ printing platform for fabricating wireless wound electrotherapy devices directly on transparent wound dressings. The system integrates a 3D vision camera, a six-degree-of-freedom robotic arm, direct-ink-writing, and geometry-aware RF design optimization. AI-based wound segmentation is used to determine wound dimensions and local surface curvature, while the reconstructed three-dimensional geometry is incorporated into the electromagnetic design of the receiving coil and interdigitated electrodes. In contrast to conventional approaches that use surface geometry only for trajectory generation, the proposed method accounts for both anatomical curvature and tissue dielectric loading to compensate for geometry-induced shifts in resonant behavior. A printable silver ink was characterized in terms of rheology, dimensional reproducibility, electrical resistance, and electromechanical stability, and was used to fabricate multilayer wireless devices directly on curved polyurethane dressings. Wireless power transfer, impedance characteristics, and electric-field delivery were evaluated experimentally and numerically. Finally, robotic in situ fabrication was demonstrated on an anthropomorphic tissue-equivalent forearm phantom, where the measured dielectric properties of the phantom were incorporated into the RF optimization, enabling resonant operation near the target frequency of 25 MHz. This work establishes a perception-to-design-to-fabrication framework for geometry-adaptive wireless bioelectronics and provides a technological foundation for future physical-AI-enabled manufacturing of personalized on-body electrotherapy devices.
https://arxiv.org/abs/2611.17638
Visuomotor imitation learning has become a predominant paradigm for real-world robotic manipulation, yet it remains data-inefficient and brittle to task-irrelevant visual shifts. Pre-trained visual representations promise to ease this burden by distilling priors from internet-scale data, but the ``right'' representation for robotics remains unresolved: existing studies span broad but sparse task distributions and reach conclusions that vary and even conflict, pointing to strong task and setting dependence. We examine this question by bringing a magnifying glass to a common contact-rich manipulation task: insertion. We compare representations from widely used vision foundation models against an explicit contact-centric representation on two closely related insertion tasks, perturb each along controlled axes of occlusion and physical tolerance, and test whether conclusions transfer to the real world. Task dependence proves to be more subtle than previous, broadly scoped evaluations revealed: the best representation differs even between our near-identical tasks, and small changes shift trends in unpredictable ways. Despite this variability, results across simulation and real-world experiments demonstrate the distinct value of spatially-grounded, and in particular, contact-centric information for contact-rich policy learning, while underscoring how difficult it is to estimate such cues reliably under realistic visual complexity and sensor noise. We hope these findings motivate further study of representations in contact-rich manipulation, along with advances in contact perception and its integration into visuomotor policy learning.
https://arxiv.org/abs/2611.17631
Human demonstrations are becoming the main source of data for dexterous manipulation, and real-to-sim-to-real pipelines multiply each demonstration in simulation. These pipelines rebuild the interaction from vision, which recovers how the hand moves. Which fingers touch, when, and how hard remain unobserved, because a hand pose shows where each finger stops on the surface rather than how far it is driven to close. This gap is a force gap: on held-out recordings, a hand policy that imitates the observed pose grips with 0.31x the recorded force, and a policy trained on physics replays of vision-tracked poses grips with 1.55x. TouchTwin closes the gap with measured human touch. Each selected TouchScale recording, captured with head and wrist RGB-D cameras and an 880-taxel glove, is rebuilt in MuJoCo. Coding agents write the objects as physics-tested programs, and a per-subject tactile hand replays the interaction with the recorded touch setting the contact and the closing force of each finger. In simulation, a policy trained on touch-grounded replays grips at 0.99x the recorded force and succeeds in 20/20 trials on held-out recordings and 35/36 unseen perturbations; a contact predictor trained on them misses 13% of real contact frames, against 32% for vision-based replays. Each replay also seeds perturbed demonstrations with simulated contact and force labels, rendered as realistic video in new views and scenes.
https://arxiv.org/abs/2611.17619
Robots with weak motors must ride their natural dynamics rather than fight them. We swing up a direct-drive planar two-link robot, whose motors deliver only about 6\,\% of its shoulder gravity torque, along its nonlinear normal modes, two-dimensional invariant manifolds consisting of periodic orbits. On a non-strict mode, injecting energy necessarily moves the state off the manifold, so pumping and stabilization compete for the same bounded torque. We split the input torque into a power-neutral steering component and a scalar pumping input, the only component that changes the energy. The allocation then becomes a linear program in two variables: maximize pumping subject to the torque limits and one control-Lyapunov constraint. The constraint uses the model-based rate of the error, so no stabilizing feedback gain is needed. Experiments in hardware show swing-ups along both modes and compare the allocation with summing-and-clipping and with prioritized stabilization.
https://arxiv.org/abs/2611.17575
Safety in robotics does not solely depend on geometric constraints, but also on semantics: the given task, environment properties, and interactions between objects in the scene. We present a framework based on vision-language models (VLMs) to infer task- and scene-dependent safety constraints for robot manipulation. We provide the VLM a structured safety tool based on an RGB-D observation and a natural-language task instruction that first decides whether the task should be rejected since its execution may result in a non-recoverable hazardous outcome. Otherwise, it identifies preventable object-pair hazards and specifies the spatial relations that must be avoided. Open-vocabulary segmentation and depth information are then used to ground the detected objects in 3D and construct continuous risk fields that represent the corresponding hazardous regions. These fields are integrated with an obstacle avoidance module that corrects nominal robot motions during execution while accounting for the risk field. We evaluate the framework on preventable hazards, tasks requiring rejection, and safe variants in simulation and the real-world. Project website: this https URL
https://arxiv.org/abs/2611.17566
Multi-turn conversational human-robot interaction (HRI) continues to be a challenging problem in robotics, as many existing systems rely on rigid, command-driven interfaces that can be unintuitive for users. Recent advances in Large Language Models (LLMs) provide a promising direction, given their ability to process natural language, generate structured outputs, and support tool-based reasoning, all of which are relevant for interpreting user intent in robotic settings. However, progress in this area is constrained by the limited availability of datasets and benchmarks that capture the nuances of real-world human communication, such as multi-turn dialogue, ambiguity, and context-dependent requests. In this work, we present a synthetically generated multi-turn dialogue dataset for HRI, annotated with action intents, object references, and task plans across a range of scenarios and user personas. Our primary focus is on evaluating the capability of small, open-weight language models for robotic tasks, particularly in settings where local deployment and efficiency are important. To this end, we frame intent extraction as a tool-calling problem where each predicted action corresponds to a structured function call with arguments grounded in the dialogue and benchmark models ranging from 270M to 8B parameters on their ability to perform intent extraction and action planning without task-specific fine-tuning. Our results show that these models can achieve reasonable performance on the task even at relatively small scales and without any task-specific fine-tuning. This suggests that compact, locally deployable models already provide a useful baseline for conversational robotic systems. We expect that task-specific fine-tuning and more realistic training data will enhance performance further and make such models increasingly suitable for real-world robotic applications.
https://arxiv.org/abs/2611.17549
Image-goal planning with a frozen visual world model depends on how predicted observations are scored against the goal. Mean-squared error (MSE) between embeddings from a pretrained visual encoder can provide a useful signal near a goal, yet favor states across an obstacle that are visually similar to the goal and difficult to reach. We fit a small residual adapter on top of frozen I-JEPA embeddings to improve this latent goal cost. Starting near each goal, a planner collects trajectories from progressively wider regions of initial states. The adapter learns from the order of observations along successful trajectories, with additional comparisons inferred from failed rollouts. No task-specific progress labels are used for fitting, so the procedure can be applied to other goal-reaching tasks. DotWall and PointMaze are used in this work. In paired 50-case evaluations with identical starts, goals, world models, and planner settings, success increases from 54% to 98% in DotWall and from 82% to 96% in PointMaze. On 16 unseen DotWall layout-goal cases, the adapter fitted on one fixed layout improves agreement between latent-cost ordering and shortest legal-path ordering from 71.9% to 85.8%. The results indicate that planning experience can improve a frozen visual representation's goal cost without retraining the encoder or the world model.
https://arxiv.org/abs/2611.17529
Improving a pretrained vision-language-action (VLA) model requires demonstrations that address its weaknesses and provide effective supervision for learning. Coding agents can autonomously generate demonstrations through environment interaction, yet successful execution alone does not ensure effective supervision for VLA learning. We introduce Agentic-Teacher, an autonomous data engine for failure-driven VLA post-training. Given a VLA checkpoint, a task specification, and configured environment tools, the engine analyzes failed rollouts, selects intervention states, and iteratively develops closed-loop code policies through execution feedback. Validated policies become reusable demonstration generators that collect successful continuations from states where the VLA struggles. To make these demonstrations suitable for learning, Agentic-Teacher introduces temporally correlated action noise to broaden state-action coverage, removes idle frames while preserving gripper transitions, and filters trajectories using the frozen base model's flow-matching loss. The resulting demonstrations are combined with successful VLA rollouts for post-training, yielding an updated policy that operates without coding-agent assistance. Agentic-Teacher thus connects the weaknesses of a target VLA to both the generation and curation of its training data. In simulation, it improves $\pi_0$ success rates from 79.4% to 87.8% on LIBERO-10, from 80.4% to 90.6% on MetaWorld-10, and from 0% to 30.0% across three RoboCasa tasks.
https://arxiv.org/abs/2611.17394
Cross-view pose estimation estimates a ground camera's geographic pose by matching onboard sensor data with geo-referenced overhead imagery. This is particularly relevant when GNSS is unreliable, for example under forest canopy or in urban canyons. Existing metric cross-view benchmarks, such as VIGOR and cross-view KITTI, are dominated by urban and road scenes with strong human-made structure without off-road terrain. We introduce GOOSELoc, a multimodal benchmark for ground-to-aerial localization in unstructured environments, including forests, fields, and rural tracks. GOOSELoc comprises 9,356 scenes recorded across all four seasons around Munich, Germany, pairing geo-referenced aerial orthophotos with surround-view RGB imagery and 3D LiDAR point clouds. Paved/unpaved labels enable analyzing the impact of terrain structure, while the seasonal recordings allow studying the appearance gap to mostly summer-captured orthophotos. To assess the transferability of existing methods, we adapt and fine-tune four state-of-the-art cross-view localization baselines on GOOSELoc. Despite task-specific fine-tuning, the performance degrades substantially in off-road environments. We therefore propose a multimodal baseline combining surround-view imagery and LiDAR geometry, improving localization performance and providing a stronger reference for future work. Data and baselines are released at this https URL.
https://arxiv.org/abs/2611.16162
Single-pass primitive decoders such as LocateAnything and VFlash predict all quantized coordinate tokens of a geometric primitive in one forward pass, enabling fast, System-1 visual planning. We study what matters when such a decoder serves as a System-1 world model: a fast action-conditioned predictor that ranks candidate pushes by their predicted outcome. On ManiSkill3 PushT-v1 (512 held-out test families, 8,192 rollouts) and on human demonstrations from lerobot/pusht (2,384 test windows), we compare decoders, training losses, rigid-body projections and coordinate frames, using matched checkpoints, hierarchical bootstrap confidence intervals and Holm correction. Two factors of similar size dominate. First, expressing inputs and outputs in the SE(2) frame of the object's initial pose lowers decision regret by 1.9-2.2x for each of five decoders, and the object-frame model trained on 128 families matches the world-frame model trained on 512. Second, single-pass decoding outperforms iterative decoding: in the object frame, single-pass heads reach 0.020-0.021 regret at 1.6-1.8 ms per decision, against 0.046 for 10-step DDIM diffusion and 0.059 for KV-cached autoregression at 10.3 and 12.9 ms. The choice among single-pass heads has no measurable effect on regret, and our registered hypothesis that the frame effect exceeds the decoder spread is not supported. Soft-token expectation with an end-to-end 2D Kabsch projection gives the lowest trajectory error (11.35 px on ManiSkill3, 3.78 px on lerobot/pusht), exact rigid-body consistency, and lower regret than diffusion at every budget from 4 to 50 DDIM steps, at 3-29x lower latency.
https://arxiv.org/abs/2611.18761
Memory-augmented vision-language-action (VLA) policies are meant to remember what happened. Many of them, however, fill memory by time: they sample frames uniformly across the episode and stamp each frame with its time step. Because time passes even when nothing happens, such a memory may not tell waiting from working. We show that it does not. On the counting tasks of RoboMME, we make the robot briefly pause or fidget its wrist. Such a null event changes nothing the task depends on, yet a released memory VLA counts the interval as work done and stops early. We call this failure phantom progress. It cuts success from 47 to 16 of 50 on one task and from 44 to 10 on the other. When the same frames are withheld from memory, success returns, so the cause lies in memory rather than in the interruption itself. We trace the failure to a temporal shortcut: because demonstrations proceed at a steady pace, elapsed time predicts progress. Indeed, rescaling the time stamps alone makes the policy stop early when the clock runs fast and repeat when it runs slow. Surprisingly, removing the time encoding does not cure the failure, because the frames of a null event still occupy slots of the time-sampled memory. Across RoboMME's released designs, vulnerability follows how memory is indexed. Of the fixes the diagnosis suggests, training with injected pauses does not remove the failure and impairs counting, whereas indexing memory by events recovers half or more of the loss without retraining. A memory meant to remember what happened should count events rather than clock ticks.
https://arxiv.org/abs/2611.14488
Despite the widespread adoption of autonomous vehicle technologies, reliable navigation within cluttered environments remains arduous due to the necessity of interaction-aware strategies; example scenarios include: narrow passages with multiple agents, lane changing in dense traffic, and crossing unsignalized intersections. These scenarios often require highly proactive strategies, simultaneously demanding interpretability and quick adaptability, which challenge end-to-end and data-driven methods. An effective strategy requires: scalability to multiple agents, adaptability to changes in other agents' behavior, and harmony with surrounding traffic without freezing or becoming overly conservative. To meet these requirements, we present SIGMO, a sigmoid-gated interaction-aware motion planner, with two main contributions. First, we formulate polynomial sigmoid functions that analytically estimate yield scores of surrounding agents using physics-grounded interaction features that capture driving intuitions. Second, we integrate the polynomial sigmoid functions into a receding-horizon planner, which facilitates interaction-aware planning with arbitrary trajectory predictions. We validate SIGMO in interaction-intensive simulations and hardware experiments. The results show that SIGMO balances proactive and defensive behavior while remaining computationally lightweight, serving as a strong baseline in a mobility stack. The simulation and hardware experiment videos are available here: this https URL.
https://arxiv.org/abs/2611.14414
Small, holonomic Autonomous Underwater Vehicles (AUVs) enable close-range inspection of underwater structures from arbitrary viewpoints, requiring accurate position and attitude tracking under state and input constraints. Model Predictive Contouring Control (MPCC) naturally handles these requirements, but relies on an accurate dynamics model, which is difficult to obtain underwater. In this paper, we present a nonlinear MPCC in all six Degrees of Freedom (DoF) for a holonomic AUV and alleviate the inaccuracies in the dynamics by augmenting the nominal model employed with residual dynamics learned via Gaussian Process (GP) regression. The learned residual is embedded in the optimal control problem through a zero-order robust optimization scheme, which keeps the controller real-time capable at 25 Hz. A simulation ablation shows that residual selection is essential when designing the controller, and simulation and in-water experiments with the Multimodality, Observing, Low-cost, Agile (MOLA) AUV validate the resulting controllers against a nominal MPCC and a field proven Proportional-Integral-Derivative (PID) controller.
https://arxiv.org/abs/2611.14373
A representation that accurately predicts a deformable object's response is not necessarily the one most useful for choosing manipulation actions. We study this distinction between predictive utility and decision utility in planar single-grasp shape control of Deformable Linear Objects (DLOs). As a common decision backbone, we introduce Geometry-Pointer-Flow (GPF), a geometry-grounded policy that separates grasp-location selection from grasp-conditioned motion generation. Its geometry-only variant reduces one-step executed shape error by 32.8% relative to a DLO-specific diffusion policy, while using 18.7 times fewer parameters and achieving approximately 193 times faster inference. On this backbone, we compare physical context represented by ground-truth parameters, estimated parameters, and learned interaction-history representations, for both forward prediction and executed control. For prediction, ground-truth physical parameters reduce next-shape error by 15.8% over geometry alone, and estimated parameters are slightly more predictive than interaction history. This ordering does not carry over to control: estimated parameters provide no detectable one-step control gain, whereas history-conditioned GPF reduces executed error by 9.9% relative to geometry-only GPF across 470 paired simulation trials. In closed loop, interaction history improves strict-threshold attainment in simulation and yields the strongest zero-shot performance on hardware. All policies are trained exclusively in simulation and transferred to the physical robot without real-world training or fine-tuning. These results show that physical context should be evaluated by the decisions it supports rather than by predictive accuracy alone. Code will be released upon acceptance.
https://arxiv.org/abs/2611.14274
Autonomous SaR requires robots to explore unknown or partially known environments, avoid hazards, coordinate team activities, and guide discovered victims to safety. Improving individual capabilities of robots does not necessarily improve mission outcomes: safer motion can restrict the exploration behavior, faster discovery can increase the rescue demand, and effective guidance depends on victim responses. We introduce PA-SaR, a mathematical and architectural framework for coordinating heterogeneous local control, learning-based exploration, supervisory task allocation, and adaptive approach-lead victim guidance around mission-level objectives. PA- SaR distinguishes environmental ground-truth, robot-specific perceptions, and simulated victim behavior. This provides a common basis for integrating complementary mechanisms and analyzing their interactions across mission stages. We demonstrate the framework through single- and multi-robot simulation studies incorporating model-predictive and learning-based exploration, perception-based safety shielding, event-driven task allocation, and adaptive victim guidance. The results show trade-offs between collision avoidance and search completion, indicate that supervisory allocation improves search completion beyond information sharing alone, and demonstrate that increased exploration does not necessarily yield more rescues. Adaptive guidance increases rescues relative to continuous leading, without a detected improvement in mean or final victim trust or a reduction in mortality. These findings support evaluating local control, team coordination, and evacuation as related but distinct aspects of autonomous SaR within the considered simulation environments.
https://arxiv.org/abs/2611.11648
We propose a Koopman model-based reinforcement learning (K-MBRL) algorithm for controlling nonlinear robotic systems with unknown dynamics. The K-MBRL learns a control policy by minimizing an approximate policy objective that combines the analytical immediate cost with an estimate of the future cost evaluated at the one-step predicted state. To this end, we develop a stochastic Koopman operator-based learning method to approximate the unknown nonlinear dynamics in a linear representation, while a critic function estimates the remaining future cost. This formulation offers two key advantages. First, the linear Koopman dynamics simplify the model-dependent policy gradient computation to a constant matrix product, enabling computationally efficient policy improvement. Second, one-step model propagation mitigates the accumulation of prediction errors associated with long-horizon rollouts while retaining long-term cost information through the critic. The learned policy enables real-time control through feedforward evaluation without online optimization. We establish policy learning convergence guarantees under standard stochastic approximation assumptions. Simulations on HalfCheetah and quadruped four-legged locomotion tasks demonstrate strong sample efficiency and improved performance compared with classical model-free and model-based reinforcement learning baselines. A pendulum swing-up task is used to assess policy gradient approximation accuracy and conduct ablation studies on the learning mechanism and key hyperparameters. The proposed K-MBRL is further validated on a physical quadruped robot performing a challenging sequence of maneuvers: rising to an upright posture supported by two rounded rear feet, maintaining balance during bipedal walking, and safely returning to the ground, as shown in Fig.1.
https://arxiv.org/abs/2611.14186
Foundation models such as GPT and Claude have shown strong capabilities in spatial understanding and embodied intelligence. These advances make agentic robotics a promising path toward artificial general intelligence in robotics. However, we find that using foundation models to control robots poses serious safety risks, and comprehensive safety evaluation is still lacking. We introduce RoboRisk, a comprehensive benchmark for evaluating safety in agentic robotics. Its 92 simulated tasks and 13 physical-robot tasks fall into five categories: Task-level Refusal (T), Plan Repair (P), Execution-time Hazard (E), Injection (I), and Sequential Memory (S). Prior benchmarks cover at most two of these categories, and several evaluate only text outputs. In contrast, RoboRisk covers all five and executes every task in closed loop. We evaluate six state-of-the-art foundation models on RoboRisk: GPT-6 Astra, GPT-6.1 Sol, GPT-6 Luna, Claude Opus 5.5, Gemini 4 Argon, and Grok 4.7. These models generally show high harm rates. We also evaluate two robot-specific APIs: the Dream API and PokeBot's RoboAPI. We further propose the Lease-Enforced Agentic Safety Harness (LEASH), which offers essential safety infrastructure for agentic robotics and can be integrated into nearly any agentic architecture. LEASH leverages a decision model (Jev or OpenAI's Decisions API) to implement task, action, and commit gates, which review the task, each action, and each irreversible operation in their visual context. The planner and all three gates share a common safety policy. Experiments on RoboRisk in simulation and on physical robots show that LEASH effectively reduces harm across all six foundation models. It largely preserves their task completion performance and adds little time and token overhead.
https://arxiv.org/abs/2611.14115
We study how to generate diverse, physically executable robot demonstrations for dexterous vision-language-action (VLA) learning. Existing demonstration-generation methods typically rely on costly teleoperated examples. Meanwhile, human hand--object datasets provide a reusable source, but existing transfer methods mainly reproduce given interactions. Turning these interactions into VLA training data further requires coverage of different objects and manipulation locations, together with executable arm and finger actions, and visual observations. To achieve this, we present DexSeed, a framework for low-cost generation of dexterous robot data from human hand--object interactions. Our key idea is to expand human sequences while preserving their grasps and realizing the resulting motions under arm-tracking dynamics in physics simulation. Specifically, we organize source sequences by grasp mode with shared language descriptions. InteractionMesh-based retargeting and arm trajectory augmentation adapt these sequences to the robot hand, different object geometries, and pick-and-place locations while preserving local hand--object relationships. An RL finger-control policy produces executable rollouts, while the arm tracks precomputed trajectories. Rendered observations and recorded actions from successful rollouts are paired with grasp descriptions to fine-tune a VLA. Experiments show improved contact fidelity in retargeting and more reliable whole-arm execution than the evaluated baselines. Simulation evaluation and real-world deployment further demonstrate that a VLA fine-tuned solely on the generated demonstrations can execute language-specified grasps. Project page: this https URL.
https://arxiv.org/abs/2611.14092
Construction tasks in hazardous and unstructured environments require both human adaptability and robotic precision, yet existing approaches often treat teleoperation and autonomy as separate control modes. This paper presents a human-in-the-loop control paradigm that enables structured transitions among VR-guided teleoperation, semi-autonomous shared control, and rule-based autonomous execution for contact-rich dual-arm construction tasks. The proposed system combines immersive VR guidance, a manually defined library of reusable skill primitives, and a shared-autonomy framework with explicit human-robot role allocation and command-priority rules. This integration allows operators to retain supervisory and corrective authority while delegating repetitive and precision-critical actions to the robot. The paradigm is validated on a dual-arm platform through representative facade-installation tasks. Results show that autonomous execution provides the best performance under well-calibrated nominal conditions, whereas semi-autonomous control improves resilience when environmental disturbances exceed the predefined autonomous pipeline's correction capability. Semi-autonomous control also substantially reduces subjective operator workload compared with full teleoperation. These findings demonstrate that effective construction-robot control should adapt human involvement to task and environmental uncertainty, using autonomy for repeatable operations and shared control for disturbance recovery.
https://arxiv.org/abs/2611.14062