Recently, multi-node inertial measurement unit (multi-IMU) systems have shown promise for robust odometry in legged robots. Multi-IMU fusion can improve legged robot odometry but requires accurate spatiotemporal calibration among the sensors. Existing multi-IMU calibration methods, designed for aerial or handheld platforms, face challenges on legged robots because routine locomotion may provide insufficient excitation, while foot slips, impacts, and vibrations introduce measurement disturbances. To address these challenges, we propose A2I-Calib++, a kinematics-driven anti-noise active calibration framework for body-mounted IMUs covered by the robot kinematic model. It estimates temporal offsets, extrinsic rotations and translations, and inertial biases through temporal correlation search followed by analytic spatial and bias estimation, without artificial calibration targets or complex parameter tuning for the target IMU. A2I-Calib++ comprises three core modules: 1) a Noise-Isotropy-Inspired Trajectory supported by a finite-horizon conditioning proposition that generates sufficient excitation to limit noise sensitivity; 2) a constraint-aware Adversarial Motion Priors controller that combines the anti-noise excitation with a rolling-contact reward for contact-aware execution; and 3) a contact-constrained virtual IMU that fuses pre-calibrated calf IMUs and joint kinematics under a rolling-contact model to construct the calibration reference. Furthermore, evaluations on both simulation and real-world quadruped platforms demonstrate notably reduced noise sensitivity and simulation calibration errors compared to conventional methods, together with repeatable real-world calibration and improved proprioceptive odometry accuracy for legged robots.
https://arxiv.org/abs/2610.29438
Real-world physical sensing exhibits complex, heterogeneous noise patterns that deviate significantly from idealized simulation, posing a fundamental bottleneck for sim-to-real transfer. Existing sensor modelings typically treat depth noise as a monolithic black-box process, overlooking the distinct physical mechanisms that govern different error modalities. In this work, we introduce a physics-grounded paradigm that disentangles monolithic noise into two complementary modalities: \textbf{sensing invalidation} and \textbf{measurement inaccuracy}, enabling a tailored treatment of noise sources based on their physical origins. Building on this insight, we propose \textbf{PRISM}, a tripartite framework that distills 3D Visual Foundation Model features as rich spatial-semantic priors for physics-based reasoning. To address the inherent sparsity and class imbalance of invalidation regions, we develop Hierarchical Positive-Prioritized Supervision, integrating multi-scale positive-weighted objectives with a positive-preserving dynamic hard mining strategy to enforce precise artifact delineation. Extensive benchmarks demonstrate that PRISM achieves state-of-the-art fidelity in noisy depth synthesis. Furthermore, downstream robotic experiments show that PRISM facilitates a \textbf{92.1\%} average success rate in the real world, marking a significant improvement over monolithic baselines. Our project page is available at: \resizebox{\linewidth}{!}{\href{this https URL}{this https URL}.}
https://arxiv.org/abs/2610.29432
Learning-based path planners based on diffusion and flow matching can generate diverse trajectories from demonstrations but typically lack mechanisms for constraint satisfaction and collision avoidance during deployment. This work proposes a framework that combines flow-matching-based path planning with model predictive path-following control to integrate data-driven path generation with real-time, constraint-aware execution. The flow-matching model captures multimodal path distributions, while the predictive controller adapts motion online to satisfy state and input constraints and avoid obstacles using updated local sensor information. An event-triggered re-planning scheme incorporates predictive control solutions into subsequent path generation, promoting collision-free navigation in environments with previously unseen obstacles. Simulation results for mobile robot navigation demonstrate robust performance across cluttered environments. The framework provides a systematic approach to combining flow matching with predictive control for adaptive, data-driven navigation.
https://arxiv.org/abs/2610.29377
Industries employ robots for repetitive tasks due to their high precision and performance, typically achieved through feedforward control actions based on an accurate robot description. However, an exact dynamic model can be difficult to obtain, especially for robots with elastic elements or when the payload changes. Learning-based feedforward approaches are promising for trajectory tracking under model uncertainties, but typically face generalization issues when task parameters vary. This paper proposes a novel method to generalize the feedforward control action with respect to payload parameters, independently of the underlying controller. Firstly, the minimal number of example objects needed for payload generalization is derived. Then, an algorithm is proposed to execute the same trajectory with a new payload, given only its parameters, without knowledge of the robot's dynamic model and even in the presence of elastic joints. The effectiveness of the proposed algorithm is validated in simulations and experiments on tracking tasks with different robots and controllers. Two sets of experiments are performed: on a standard Franka Emika Panda robot, and on a Franka Emika Panda robot equipped with an elastic wrist.
https://arxiv.org/abs/2610.29356
Long-horizon robot manipulation requires a robot to remember task-relevant information beyond its short observation window. Existing memory-augmented policies typically retrieve relevant information from history and reason over it at execution time, placing a heavy reasoning burden on the high-level model. To address this challenge, we propose PAL (\textbf{P}lan first, \textbf{A}ct \textbf{L}ater), a hierarchical memory framework for vision-language robot manipulation. It maintains a short-term visual buffer, a semantic-event memory, and an executable \texttt{subtask\_list}. A high-level vision-language model (VLM) converts streaming visual observations into the \texttt{subtask\_list}. At execution time, the VLM selects the currently relevant subtask from the \texttt{subtask\_list} and passes it to a low-level vision-language-action (VLA) policy. To teach the model what to write to memory and when to update it, we introduce a two-stage data generation procedure that first expands sparse update supervision and then uses self-labeling with task-grounded verification to generate training data that better match the state distribution encountered during execution. We evaluate our approach on memory-dependent benchmarks and real-world manipulation tasks. On RoboMME, PAL achieves a \textbf{56.05\%} success rate, outperforming the strongest baseline, FrameSamp-Modul, at 44.51\%. In real-world experiments across four manipulation tasks, \pal{} reaches \textbf{60.83\%} overall success, surpassing MemER (45.00\%) and FrameSamp-Modul (28.33\%). These results show that proactively writing future-relevant subtasks into hierarchical memory improves long-horizon visual reasoning and robot control. Code and videos can be found on our website: this https URL
https://arxiv.org/abs/2610.29329
Learning inertial odometry for a new platform usually requires ground-truth trajectories. We show that an inertial odometry model can instead be trained from scratch by a myopic teacher that integrates the IMU over each short window independently, a scheme we call integration self-supervision. Interestingly, although supervised only by short-window velocity changes, the student learns to directly predict velocity, and does so more accurately than its integration teacher. Pose graph distillation then refines the model with sequence-consistent targets from a pose graph over many windows. Training on a new platform therefore no longer requires collecting ground-truth trajectories, but only calibrating the IMU and recording data during normal operation. Across six datasets spanning pedestrians, drones, quadrupeds, and a humanoid, the same recipe with no velocity or position labels trains models that come within 0.07~m/s average velocity error of a same-architecture supervised baseline.
https://arxiv.org/abs/2610.25988
Large language models (LLMs) are increasingly integrated into embodied robotic planning, yet standard benchmarks primarily evaluate end-to-end task completion in nominal environments, obscuring failure origins across the execution stack. We present Alpha, a systematic fault-injection and robustness-evaluation framework for LLM-driven manipulation in simulation. Alpha injects calibrated faults across perception (sensor lag), actuation (grip slip), kinematics (unreachable targets), and planning (planner-output corruption), alongside concurrent conditions. To separate physical vulnerabilities from planner sensitivities, we introduce a matched methodology pairing an LLM agent (Llama-3 via Ollama) against a deterministic Scripted Oracle planner across a balanced 150-episode matrix under identical seeds, geometries, and safety criteria. Across the matrix, the Oracle achieves 64.0% (48/75) success while the LLM achieves 44.0% (33/75) (paired McNemar p = 3.01 x 10^-4). Crucially, excluding planner-output corruption, performance across all physical and kinematic conditions is identical: 55.0% (33/60) for both planners with zero discordant pairs (McNemar p = 1.00). This demonstrates that physical actuator slip, kinematic reach boundaries, and perceptual staleness affect deterministic controllers and LLM planners equivalently. The performance gap is driven entirely by planner-output corruption (100% Oracle vs. 0% LLM), isolating the prompt-to-JSON serialization and validation interface rather than a cognitive reasoning deficit. We also audit 169 historical pilot attempts for transparency.
https://arxiv.org/abs/2610.30197
Language models are being explored as the interface through which space robots interpret operator commands and select among verified skills. Running them onboard calls for low-bit compression, and flight use adds requirements that generic post-training quantization leaves implicit: a fixed memory budget and storage format, a static artifact under configuration control, and behavior close to the full-precision model validated on the ground. We treat compression as a ground-segment step and study QSelect, which composes one static low-bit model from compatible AWQ, GPTQ, and AutoRound checkpoints by assigning each linear module to one quantizer family and scoring every substitution at the final next-token distribution. The default fidelity mode needs no labels or tuned thresholds and accepts a substitution only when the forward KL divergence from the BF16 reference decreases; an optional target-adapted mode adds answer likelihood on a small labeled set. On DeepSeek-R1-Distill-Qwen-7B, Llama-3.1-8B, and Llama-3.2-3B at 3 and 4 bits, composed models reach lower mean held-out perplexity than every single-family model in all six settings, and the fidelity mode lowers perplexity and KL further. In a matched scaffold, final-output scoring gives lower held-out KL than representation-similarity scoring in all 12 paired runs. With labels from training or development splits of the evaluated task families, the target-adapted mode raises 3-bit pooled accuracy on the two Llama models by 4.3 and 4.5 points over the best single-family model. At 3 bits, unquantized embedding and output layers make up 43-46% of the packed artifact. All evaluations use general-domain benchmarks on a ground GPU; space-domain tasks and flight hardware are left to future work.
https://arxiv.org/abs/2610.29302
World Action Models (WAMs) have shown strong potential for robot manipulation by jointly learning visual dynamics and executable actions. However, their video and action objectives do not explicitly constrain the 3D geometry that is crucial for precise manipulation. Recently, geometry-aware WAMs introduce depth or 4D prediction branches, whereas representation alignment methods supervise intermediate WAM features with pretrained 3D foundation models. Yet we find that such pointwise alignment benefits the video features but degrades action learning, since dense geometric feature targets overly restrict compact action features. To address this limitation, we propose Relational Geometry Forcing (RGF), which transfers geometric priors from a frozen 3D foundation model by aligning pairwise feature relations instead of pointwise features. Specifically, RGF applies three complementary relational objectives, where intra-frame and cross-view relations transfer scene geometry and multi-view correspondence to the video features, while action-temporal relations couple action dynamics to geometric scene evolution. Applied only during training, RGF requires no explicit geometry branch or extra inference module. Extensive experiments in simulation and the real world demonstrate the effectiveness of Relational Geometry Forcing, showing consistent gains across diverse manipulation scenarios and WAM paradigms.
https://arxiv.org/abs/2610.29282
Large pretrained robot foundation models provide strong priors for manipulation, yet adapting them to target tasks with offline teleoperated demonstrations often fails to cover the contact-rich, recovery, and precision-critical states encountered during deployment. Existing methods mitigate this issue by augmenting offline demonstrations with human-in-the-loop data or online reinforcement learning. Despite this, offline post-training adapts slowly because it cannot immediately absorb deployment experience, while online RL typically relies on value functions or auxiliary actor-critic models, increasing both training complexity and instability. We present TIDE (Training In DEployment), a human-in-the-loop online post-training system. TIDE introduces a provenance-conditioned supervised learning framework that updates the policy online from human interventions and policy-generated rollouts collected during deployment, without a learned critic, reward model, or action scorer. Across four real-world bimanual manipulation tasks, TIDE improves milestone-normalized task progress and binary full-task completion over the warm-start policy and matched additional offline demonstrations, and performs comparably to the fixed-policy collection baseline while making updated checkpoints available during deployment. Each task-specific online post-training session, from the start of deployment rollouts until the final checkpoint is available, completes in less than one hour while learning and checkpoint handling run asynchronously.
https://arxiv.org/abs/2610.29264
Fast and reliable manipulation is crucial for practical robot deployment. Although Vision-Language-Action (VLA) models have recently shown remarkable progress as generalist robot policies, their execution often remains temporally inefficient. A key source of this inefficiency is that policies learn fine-grained temporal patterns from teleoperated demonstrations, requiring many low-level action steps. Temporal action quantization offers a simple way to accelerate execution by aggregating consecutive low-level actions into temporally coarser actions. However, applying action quantization without considering when fine-grained control is required introduces a speed-accuracy trade-off: accelerated actions may efficiently reduce redundant steps in some phases, while discarding critical motion details in precision-sensitive interactions. To address this, we propose PaceVLA, a unified framework for adaptive temporal execution in VLAs that integrates two coupled components: (1) mode-specific action decoders built on a shared action expert, supporting multiple temporal granularities and prediction horizons, and (2) a quantizability-guided mode selection scheme which decides whether coarse execution is appropriate, and a context-conditioned router that selects an execution mode at each inference step. Experiments across three multi-task simulation benchmarks and six real-world tasks show that PaceVLA improves execution efficiency while maintaining task success rate across multiple embodiments, including long-horizon and dexterous manipulation.
https://arxiv.org/abs/2610.25961
Robot deployment generates experience that can support policy improvement, but continued reliance on expert corrective actions makes learning difficult to scale across growing fleets. We propose learning from fleet experience: using deployed robots' own executions as a source of supervision for further policy improvement. We call this paradigm Collective Experience Learning (CEL), in which robots pool execution experience to update a shared policy that returns to the fleet. Following expert-supervised initialization, we realize CEL through failure-guided experience retrieval fine-tuning (FERT). FERT uses failure contexts to retrieve relevant segments from successful trajectories and prioritizes their recorded actions for supervised updates, without collecting additional expert demonstrations or corrective actions. Operators provide binary episode-outcome labels and environment resets. A fault-tolerant asynchronous training system (FATS) coordinates robot execution, cloud inference and policy optimization despite local interruptions. Across five real-world manipulation tasks, the resulting policies achieve success rates of 93.3-99.2%, evaluated over 120 trials per task on robots excluded from training data collection. With collection time per robot held fixed, larger fleets provide more experience and generally improve performance across the evaluated sizes. On multi-stage phone packaging, learning with 96 robots raises success from 79.2% to 98.3%. These results support CEL as a scalable approach to improving robot policy reliability through experience generated during deployment.
https://arxiv.org/abs/2610.25736
Vision-language-action (VLA) navigation models translate visual observations and instructions into actions. Navigation success assesses whether an agent reaches the goal. However, reaching the goal successfully does not establish whether the model genuinely follows the instructions or relies on visual cues or navigation history. We introduce NavBind to diagnose instruction-action binding: whether changing the instruction influences the probabilistic distribution of the actions, with the navigation context fixed. We construct 3,252 route-fork contexts by recombining route-aligned instruction segments from R2R-CE and RxR-CE. Each context pairs full instructions that share the description of the route already traveled but specify different branches. Both are evaluated under the same agent state and navigation history. We compare generated local action sequences, the likelihoods of fixed reference action sequences under both instructions, and changes in visual attention and attribution. Across the evaluated models, higher reported navigation success does not imply that the model more faithfully follows the instructions.
https://arxiv.org/abs/2610.29203
Every driving scene is logged once, but driving is one-to-many: the scene determines which behaviors are feasible, while an instruction selects among them. A log records only the action taken, leaving no direct supervision for alternative feasible actions or instructions the scene cannot support. Consequently, a policy that ignores language and one that follows it without regard to scene constraints can fit the same data. We present Cartender, which learns from the drives not taken. Counterfactual Branching constructs matched and mismatched instruction-action pairs from real recordings without a simulator: a vision-language model proposes alternative futures and their selecting instructions, while unsupported instructions provide negative labels. A learned scene-language compatibility score regulates language conditioning in trajectory generation, and a reward-trained language residual re-ranks generated candidates over a scene-based score. The branches are used for training; instruction following is evaluated by swapping instructions under identical recorded inputs and measuring behavior rather than agreement with generated targets. On WOD-E2E, the best of four proposals achieves an RFS of 8.642 across 3,603 feasible instruction conditions. Across 8,974 admitted proposals, mean RFS is 8.203 versus 7.906 for matched logged trajectories, and 67% score higher than their logged counterpart. Compared with matched-only imitation using the same backbone, Cartender improves same-scene paired instruction success from 23.67% to 57.00% and RFS from 6.32 to 7.10; its gate reduces infeasible-instruction execution from 53.36% to 14.18%.
https://arxiv.org/abs/2610.26390
Retargeting human motion to humanoids requires preserving motion semantics while accounting for the robot's physical constraints. Kinematic pipelines prescribe a robot trajectory through geometric matching, without establishing whether it can be executed under the robot's dynamics. Prior physics-supervised neural methods train bidirectional full-sequence models on physics-refined kinematic trajectories, remaining tied to prescribed kinematic solutions and requiring noncausal context. We propose SMR, a streaming neural motion retargeter learned from semantic-conditioned physics experts. We convert human motion into robot-aware task-space targets for body landmark positions, orientations, and velocities. Physics experts track these targets directly in simulation under contact, dynamics, and actuator constraints. We train a single strictly causal Transformer on their executed state trajectories that complete the motion and pass semantic and physical validity checks. At each incoming frame, the student uses only current and past human observations to generate a robot motion reference for a downstream whole-body controller. Experiments demonstrate that semantic-conditioned physics experts generate motion with higher semantic fidelity and physical validity than direct optimization-based retargeting, while the resulting streaming retargeter achieves improved closed-loop performance over kinematic and physics-refined baselines under a common whole-body controller.
https://arxiv.org/abs/2610.29169
Human-in-the-loop (HIL) post-training improves vision-language-action (VLA) policies through expert corrections, but costly human supervision and repeated real-robot evaluation limit algorithm exploration and development. We introduce SimPT (Simulation-based Post-Training), a simulation framework that automates intervention-based VLA post-training by integrating policy rollouts, corrective data collection, policy training, and standalone evaluation. To automatically determine intervention timing and recovery strategies, we develop an Agent-Compiled Progress Graph that tracks task progress using privileged simulator state and retains stable snapshots during policy execution. After a rollout fails, a CuRobo-based expert attempts recovery from these snapshots, starting at more advanced task stages and falling back to earlier ones as needed to generate corrective trajectories. We implement and compare four post-training methods, RECAP, HG-DAgger, DPO+SFT, and FlowPRO, across seven RoboTwin manipulation tasks. Relative to a fixed-interval snapshot baseline, the Progress Graph reduces recovery attempts by 75.0% and increases recovery success from 93.4% to 98.9%. Using SimPT, we develop RECAP-CF-LPF, a refinement of RECAP that combines cross-fitting and low-pass filtering of value predictions. This refinement increases the overall success rate from 76.50% to 79.36% in held-out simulation trials. In real-robot HIL post-training, it increases the success rate from 72% to 96% across 25 scenarios of an Ethernet cable-insertion task. These results demonstrate the utility of SimPT for exploring and developing VLA post-training algorithms.
https://arxiv.org/abs/2610.29161
Traditional robotic navigation systems separate mapping, planning, and low-level control through cascaded modules, introducing computational overhead and accumulated latency. End-to-end reinforcement learning offers a compact unified policy that maps onboard observations directly to control actions. However, on inherently unstable platforms such as two-wheeled inverted-pendulum robots, navigation progress and obstacle avoidance can conflict with attitude stabilization in a strongly state-dependent manner. We propose a lightweight state-dependent objective coordination method for integrated navigation and control. A pitch-conditioned scalarization coefficient $\beta(s)\in[0,1]$ adjusts the relative contributions of balance stabilization and navigation objectives during training, without extra control hierarchies or auxiliary attitude-stabilization controllers, such as proportional-integral-derivative (PID) or linear-quadratic regulator (LQR) controllers. To support zero-shot deployment, simulation training models execution delay, action hold, asynchronous and noisy observations, and dynamics uncertainty. Gradient analysis reveals persistent directional interference and state-dependent variation in the objectives' relative scales. Comparisons with alternative reward-weighting, constraint, training, and control-structure strategies show that PPO+$\beta(s)$, where PPO denotes proximal policy optimization, achieves 98% and 95% success rates with small attitude excursions on the fixed obstacle map and the randomly generated high-obstacle-density map, respectively. Zero-shot hardware experiments further demonstrate bounded attitude behavior and consistent obstacle avoidance using only onboard observations. Training and evaluation code will be made publicly available upon acceptance.
https://arxiv.org/abs/2610.29142
Vision-based insertion requires correcting alignment errors while retaining useful behavior learned from demonstrations. We present ACT--Flow, an online learning framework that couples an adaptive Action Chunking Transformer (ACT) with a conditional residual flow policy. Following anchor-guided warmup, ACT absorbs successful executed actions through behavioral cloning, while residual targets are recomputed relative to the updated prior. A chunk-level critic learns from successful and failed interactions and evaluates final composed actions. Its estimates weight generated residual candidates for flow matching, complemented by supervision from successful real executions. Candidate scoring is confined to training; deployment uses RGB observations and samples one residual per action chunk. We evaluate the framework on power-plug, USB, and key insertion, together with cable routing and needle threading. Results show a five-task mean success rate of 66% at 20,000 post-initialization interaction steps, exceeding the strongest baseline by 18 percentage points at this checkpoint. Evaluations at matched checkpoints with the residual disabled show ACT's mean success increasing from 16% to 76%. Component ablations further support the complementary roles of behavior absorption, value weighting, and successful-action supervision.
https://arxiv.org/abs/2610.29117
World models predict how embodied systems evolve under actions, but their accuracy can degrade when physical conditions move outside the training distribution. We study two components of causal modeling: which inputs a predictor may use, and how its mechanism computes their effects. In a synthetic benchmark with shortcut features, a frozen dependency mask derived from paired interventions reduces mean out-of-distribution (OOD) RMSE from 1.769 for a fully connected predictor to 0.697, close to the generator-oracle mask (0.694). For robot link-mass extrapolation in CausalWorld, with disjoint training and test mass ranges, we develop finger-local world models in which link masses enter inertia and dynamics-bias terms through explicit affine coefficients, actions act through either a learned torque network or the known PD controller, and learned residuals capture contact-related effects. Compared with a separately trained control whose mass inputs are fixed at training means, the known-PD model turns out-of-range masses into a consistent predictive gain: median time-averaged joint R2 over 150-step rollouts rises from 0.609 to 0.727, with improvement in all ten task-seed runs (exact two-sided sign test, p = 0.002). In a shared 100-step forecast, the learned-torque model is competitive with the strongest recurrent robotic world model (RWM) configuration (median joint R2 of 0.755 - 0.768 versus 0.752), whereas supplying out-of-range masses sharply degrades the MLP and recurrent predictors. These results indicate that how a physical parameter enters the dynamics mechanism determines whether its out-of-range value helps or harms prediction.
https://arxiv.org/abs/2610.29088
Currently, dexterous humanoid robot hands are widely considered the final hardware bottleneck that hampers generalist robots from physically assisting people at home and work. As conventional tendon-driven designs suffer from high cost, demanding maintenance, poor reliability, and short durability, alternative linkage-driven designs have increasingly gained attention. Despite their potential to avoid the weaknesses of tendon-driven hands, integrating multiple degrees of actuation (DOA) in a single digit with linkage drivetrains is a challenge for design and fabrication. Only a few studies have managed to present functional humanoid hands that are completely linkage-driven and have at least three DOAs per digit without compromising actuator placement and other design preferences. Our work introduces a new linkage-driven hand featuring a unique flexure hinge. Together with elastic drive rods made of spring steel, the linkage drivetrains are significantly simplified. Unlike other linkage-driven designs of similar dexterity, our design does not require many miniature moving parts. As a result, the hand can be fabricated easily with a budget 3D printer. This not only significantly lowers the barrier to entry for using and developing dexterous humanoid robot hand functions, but also allows the hands to be sized much closer to regular human hands. The design offers desirable kinematic advantages as well. A prototype is evaluated for grasping and object manipulation. In addition, this paper presents our latest findings on kinematics and control of the hand.
https://arxiv.org/abs/2610.29030