This study develops an integrated, reproducible design assessment for a four-wheel educational rover intended for the high-school remote-control division of the 2027 NASA Human Exploration Rover Challenge. The architecture combines commercial differential drive control, independently sprung wheel carriers, separate drive and task batteries, and a Raspberry Pi-based subsystem that executes received imaging and ranging commands. The analysis reconciles component lists with dimensioned computer-aided design views, derives mobility and electrical constraints, and connects sensor geometry to command execution. At the estimated mass of 10.919 kg, a 215 mm wheel rotating at 200 RPM produces a theoretical rolling speed of 8.105 km/h; consequently, the nominal motor label does not establish compliance with an 8 km/h design ceiling. A steady 20-degree climb requires at least 1.255 newton-meters per wheel under an assumed rolling-resistance coefficient of 0.10 and equal torque sharing. At 50 ft, an ideal 12-inch feature spans approximately 71 pixels across a full-resolution Camera Module 3 Standard image, while a 1-degree pointing error displaces the ranging ray by approximately 266 mm. An executed synthetic benchmark compares color-geometry rules and two linear support-vector classifiers on 2,400 generated board crops with scene-disjoint evaluation. A separate reference command executor is checked using mocked hardware. These software results and analytical sensitivities support a testable development plan; the study does not report physical rover trials. The principal contribution is a traceable connection between component choices, failure mechanisms, quantitative design limits, and reproducible verification tasks.
https://arxiv.org/abs/2610.36816
It is well established that some animals, such as sea turtles, sense the Earth's magnetic field and use it as a primary cue for long-distance navigation across the vast and featureless ocean. This remarkable ability has inspired the development of bio-inspired magnetic navigation (BIMN), which seeks to mimic these animals to develop robust and frugal navigation methods. BIMN exploits the Earth's magnetic field, sometimes described as ''Nature's GPS'', as a natural navigation infrastructure, providing a potential alternative to vulnerable satellite navigation systems. However, unlike geographic coordinates, magnetic coordinates extracted from the Earth's magnetic field do not provide a one-to-one mapping to geographic locations. Different locations can exhibit similar magnetic signatures, creating ambiguity and making BIMN inherently more challenging. Despite this fundamental challenge, we demonstrate that, within predefined regions of the Earth, magnetic inclination and intensity provide sufficient information to navigate to any destination. By formulating BIMN as a gradient flow control and guidance problem, we show that the resulting gradient flow act as current that carries the system and can be controlled to guide it through intermediate waypoints toward the desired destination. The resulting framework provides a GPS-free navigation mechanism with potential applications in both engineering and biology. In engineering, it can be used to establish a geomagnetic navigation infrastructure through which prescribed routes can be defined and followed, while in biology, it can be used to analyse the migration routes of animals known to rely on magnetoreception.
https://arxiv.org/abs/2610.36812
Learning controllable world dynamics from heterogeneous interaction videos is challenging because robot embodiments use incompatible action spaces, while human videos lack native control labels. We present RynnWorld-Latent, a cross-embodiment video world model that uses the 3D-grounded latent actions introduced by RynnLAM as a shared conditioning interface. This representation enables joint pretraining on human interaction videos, robot demonstrations, and simulation rollouts without requiring a common native action space. Built on a pretrained video transformer, RynnWorld-Latent combines global action tokens with an identity-initialized local pathway that aligns actions with future video latents. We pretrain on 23 datasets comprising approximately 553.5M frames and adapt the model to target robots through post-training. The framework supports two data-generation routes: digital teleoperation uses target robot commands to generate action-video demonstrations, while latent-action synthesis transfers source motion to an edited initial frame and pairs the resulting rollout with retargeted pseudo robot actions. Experiments show improved video prediction metrics on public benchmarks and two real-robot platforms, alongside qualitative action following when different action sequences share the same initial observation. Synthetic mid-training improves policy success rates on LIBERO and LIBERO-Plus, and both generation routes improve real-world policy success rates over real-demonstration-only training in the evaluated settings. These results support universal latent actions as a scalable interface for learning controllable visual dynamics across heterogeneous embodiments.
https://arxiv.org/abs/2610.36791
Humanoid dexterous hands are a core component of embodied intelligence, enabling robots to translate high-level intent into rich and adaptive physical interaction. However, existing designs remain constrained by a persistent trade-off among anthropomorphic kinematic complexity, mechanical robustness, load capacity and control simplicity, limiting dexterous manipulation in unstructured environments. Here we present Torch-Hand, a fully articulated humanoid dexterous hand that replicates the joint structure and motion hierarchy of the human hand with 21 degrees of freedom (DOF), comprising a highly articulated five-DOF thumb and four DOF in each of the remaining fingers. The differentiated thumb integrates multi-axis CMC motion to provide broad opposition and flexible contact orientation relative to the four fingers. Unlike tendon-driven or hybrid actuation approaches, Torch-Hand adopts an entirely linkage-based transmission architecture. By integrating screw-linkage actuation, the hand achieves high grasping force and substantial payload capacity while maintaining a compact anthropomorphic form. Its actuation architecture is optimized for control tractability, with all actuators integrated within the palm and arranged in a serial-robot-like configuration that establishes a direct correspondence between motor motion and joint kinematics. This architecture mechanically decouples functional DOF to reduce unintended inter-joint motion propagation, while allowing independently addressable DOF to be actively coordinated into coupled multi-joint motion patterns during complex manipulation. Comprehensive experiments assess reachable workspace, coordinated fingertip trajectories, thumb opposition, 33-grasp taxonomy coverage, grasping force, payload capacity and task-level manipulation. These results establish Torch-Hand as a robust hardware foundation for dexterous embodied manipulation.
https://arxiv.org/abs/2610.36789
Self-driving laboratories (SDLs) are laboratory systems that couple experimental planning, automated execution, and measurement feedback in a closed loop. Integrating flexible robot control with the typed application programming interfaces (APIs) and continuous measurements exposed by laboratory instruments remains an execution-interface challenge. To address this challenge, we propose a traceable framework comprising four components: LAM (Lab Action Model), OpenSDL, Safe-SDL, and L3-Bench. LAM is a proposed measurement-conditioned policy architecture that extends vision-language-action paradigms to generate both continuous robot trajectories and typed instrument API calls. OpenSDL is an execution substrate with an initial control implementation, designed to map role-level operations to heterogeneous devices, coordinate execution, and record timestamped causal events. The proposed Safe-SDL runtime gate combines pre-dispatch schema and resource checks with signal temporal logic monitoring during execution, including extended waiting periods. L3-Bench (Level-3 Laboratory Benchmark) specifies an episode-level evaluation protocol covering physical outcomes, timing, reproducibility, safety violations, and fault recovery. Together, these components provide an end-to-end design for linking hybrid action generation, monitored device execution, measurement feedback, and experimental evaluation, addressing coordination and traceability challenges in SDL workflows.
https://arxiv.org/abs/2610.36761
This paper presents an approach to achieve side-by-side autonomous motion with a pair of personal mobility vehicles (PMVs). Given a global path, two PMVs plan cooperatively so as to hold a social formation that lets the passengers hold a conversation, while keeping the ride safe and smooth. Each vehicle runs its own sampling-based model-predictive planner; the planners exchange nothing but the odometry each vehicle could observe of the other, and the joint decision is expressed as a pair of utility matrices over pairs of candidate trajectories, resolved by a common rule. The behavioural parameters are fitted by inverse reinforcement learning from 409 minutes of driving by ten pairs of people in human-driven PMVs in an indoor environment, and the lanes the pair can use are derived offline from the corridor itself rather than fixed by hand. A safety layer the cost cannot override executes a move only if the vehicle can still brake clear, measured from its whole body, and a vehicle that is stuck reverses along its own path and continues. In closed-loop simulation over 24 runs in the conditions the drivers were recorded in and 24 in four generated obstacle layouts, no vehicle entered a wall or a cone. The pair holds conversational formation for 60.5 and 68.9 percent of the time among obstacles (anticlockwise and clockwise) and 81.2 and 91.5 percent in a clear aisle, against the drivers' 34.0 and 36.0 percent, and 52.9 and 56.0 percent, and it matches their speed. It keeps one lateral formation where the drivers alternated between a close diagonal and a wide abreast one, and it varies far less. Experimental results are based on a differential drive kinematic simulator running on ROS 2.
https://arxiv.org/abs/2610.36726
Mobile robot manipulators extend contact-task capability beyond the workspace of fixed robot installations, but their bases must also sustain the forces generated by the task. On lightweight platforms, base motion and support compliance can change the force and motion realised at the workpiece. How these non-rigid base effects manifest during sustained contact remains insufficiently characterised. This paper investigates non-rigid base effects in mobile robot manipulators through a sanding case study combining exploratory simulation with experiments on two lightweight, unactuated wheeled testbeds. Joint measurements of contact force, tool motion, and base vibration show that sustained contact coexisted with substantial task error: under low base-ground resistance, only 54-70% of a 100 N command was realised, with tool-centre-point errors reaching 100 mm. Increasing base-ground resistance during contact improved force realisation and arrested further tool displacement, while base vibration did not vary consistently with force-tracking error in the tested conditions. These observations illustrate how non-rigid base behaviour can affect contact-task execution and highlight the value of examining force, motion, and vibration together when characterising lightweight mobile manipulation.
https://arxiv.org/abs/2610.36725
Flow-based policies for language-conditioned multi-task manipulation commonly share a single $\textit{Gaussian}$ source prior and a common linear transport path across tasks. However, reliably executing multiple tasks with distinct motion requirements remains challenging for a shared policy. We introduce $\textbf{TOPS}$ ($\textbf{T}$ask-$\textbf{O}$riented $\textbf{P}$riors and $\textbf{S}$chedules), which adapts the flow source prior and interpolation schedule to each task without modifying the network architecture. TOPS first constructs multimodal task sources from reverse-mapped expert action sequences, allowing language instructions to select where generation begins. Guided by source-target covariance mismatch, it then slows the transition toward expert actions early in denoising and accelerates it later along directions requiring expansion. Under a $\textit{Gaussian}$ endpoint model, our analysis shows that this schedule adjustment can lower an upper bound on velocity-prediction risk. Experiments on LIBERO, LIBERO-Plus, and CALVIN demonstrate improved performance across in-distribution, perturbation and cross-environment settings, alongside better data efficiency. Using one integration step, TOPS raises LIBERO-10 success from $53.44\%$ to $69.67\%$ compared with ten-step Standard Flow Matching (FM), while reducing inference time to approximately one-sixth of the baseline. TOPS also yields consistent gains when transferred to the large-scale flow-based $\pi_{0.5}$ policy across all four evaluated settings. Real-world experiments further demonstrate improved task success, including an increase from $20\%$ with standard FM to $80\%$ with TOPS on the upper-drawer opening task.
https://arxiv.org/abs/2610.36694
Bimanual robot manipulation plays an important role in real-world robotic applications, but the high cost of collecting bimanual demonstrations limits the scalable development of bimanual policy learning. Meanwhile, existing single-arm manipulation data are difficult to directly transfer to bimanual systems due to the Single-to-Dual gap in action spaces, coordination requirements, and arm-side spatial preference. To address this issue, we propose RoboSTD, a zero-shot Single-to-Dual data construction method for bimanual robot learning. RoboSTD first applies sagittal-plane mirroring to observations, proprioception, and actions to construct executable contralateral pseudo-demonstrations. It then uses an LLM to generate structured spatio-temporal coordination constraints that guide the reconstruction of pseudo-bimanual supervision across workspace regions and task stages. We evaluate RoboSTD on the AgileX ALOHA platform in both RoboTwin simulation and real-world settings. Experiments demonstrate the effectiveness of RoboSTD for bimanual policy learning. Without requiring additional bimanual demonstrations, RoboSTD increases the average number of collected cups to 2.11x that of the single-arm baseline in the cup collection task. Project page: this https URL
https://arxiv.org/abs/2610.36685
Animals exhibit diverse shape-changing behaviors, from the undulatory swimming of eels to the arching movements of inchworms. Reproducing these biological shapes with modular soft robots offers a promising approach to developing versatile bioinspired robotic systems. However, translating a desired shape into a feasible robotic configuration remains challenging. Existing cable-driven modular soft robots rely on computationally expensive physics-based modeling and combinatorial search for inverse design, making it difficult to efficiently reproduce diverse target shapes. To address this challenge, we present a learning-based real-to-sim-to-real framework that translates biological curves into robotic configurations through surrogate-assisted inverse design and uncertainty-guided refinement. The proposed method combines learned inverse prediction with targeted candidate exploration, using a fast forward surrogate to evaluate and select suitable designs. The learned forward surrogate reduces deformation prediction time from $1.53 \times 10^5$ ms to 0.0008 ms, achieving approximately a $1.9 \times 10^8$-fold speedup. At the same time, the proposed inverse design method reduces design time from $1.99 \times 10^6$ ms to 4.18 ms. On 5,000 test samples generated from previously unseen threading patterns, the method achieves a 93% shape reconstruction success rate under surrogate-based evaluation. Physical demonstrations with four bioinspired robots further illustrate the translation of biological curves into realizable robotic shapes.
https://arxiv.org/abs/2610.36681
Sparse event responses produce uneven keypoint errors whose effects on spacecraft pose depend on correspondence geometry and the reliability of successive observations. We present a reliability-aware framework connecting polarity--time localization, geometric recovery, event--CAD refinement, and trajectory optimization. A three-branch representation combines positive events, negative events, and recent-event timing through cross-branch attention and gating, followed by spatiotemporal aggregation. An ordered semantic-point head estimates relative correspondence precision for geometrically constrained pose recovery. Event-edge and CAD-projection agreement then guide local pose refinement under keypoint-geometry safeguards. At the sequence level, a ten-dimensional descriptor combines heatmap shape, reprojection consistency, and geometric conditioning to set time-aligned observation scales. On the official SPADES challenge test set, the complete system achieves a combined pose score of 0.0474, approximately 5.4\% below PASAN+IRIS. Validation ablations reduce the score from 0.0772 for base localization with uniform PnP to 0.0514 for the complete cascade; on identical single-frame observations, quality weighting reduces the score from 0.0549 with constant-weight optimization to 0.0514.
https://arxiv.org/abs/2610.36625
Enabling a humanoid to interact naturally with human partners requires preserving not only individual motions but also the spatial, semantic, and contact relationships underlying the interaction (i.e., hugging, dancing, hand-shaking, etc.). Furthermore, a practical solution should generalize across various humanoid embodiments with distinct morphologies and kinematic constraints. To tackle this challenge, we propose HumiTransfer, a mimetic embodiment transfer framework that converts in-the-wild human-human interaction videos into physically plausible human-humanoid interactions. HumiTransfer first reconstructs 3D human motion with consistent foot-ground contact, then transfers one participant to a target humanoid embodiment via interaction modeling, using weighted joint-relative directions and anatomical offsets to prioritize interaction-critical inter-body relationships, while post-retargeting optimization enforces balance, contact, and collision avoidance. Subsequently, we apply HumiTransfer to 1,200 in-the-wild videos, producing approximately 500,000 frames of diverse interactions for the 26-DoF Unitree R1 Edu and the 23-DoF HighTorque Mini-hi humanoid robot, resulting in our HumiMimic dataset. Across both robots, HumiTransfer achieves superior motion fidelity, preserves inter-body relationships, and maintains contact accuracy compared with existing baselines. Moreover, we demonstrate that HumiMimic supports motion generation methods for synthesizing interactive humanoid motions following a human partner. Finally, our real robot deployments confirm the physical executability of the transferred motions in real-world settings.
https://arxiv.org/abs/2610.36615
Handheld data-collection interfaces such as the Universal Manipulation Interface (UMI) allow manipulation demonstrations to be gathered in the wild without a robot in the loop, but the quality of the resulting action labels is bounded by the accuracy of vision-based localization. Existing systems recover end-effector pose from monocular visual-inertial odometry, which is subject to scale ambiguity and drift, or delegate tracking to closed-source modules and external infrastructure that reintroduce cost and setup burden. We present OpenJaws, a fully open hardware and software framework for sensorized UMI that improves localization and simplifies deployment across robot platforms. OpenJaws pairs a modular, 3D-printed gripper exposing a standardized ISO adapter with a low-cost stereo camera to recover metric camera trajectories. We further introduce UMI-Loc-Bench-v1, a benchmark quantifying real-world localization accuracy for handheld data-collection devices, and show that stereo localization substantially outperforms monocular alternatives. Finally, we demonstrate that policies trained on data collected with OpenJaws can be deployed on a real robot across multiple tasks. Hardware, software, and data are released under a commercially permissive license. Code, data, and videos are available at this https URL
https://arxiv.org/abs/2610.36598
Humanoid locomotion in confined spaces requires continuous height adaptation across multiple locomotion modes, yet most existing approaches remain limited to height-adjustable bipedal walking. We present REACH, an RL-based hierarchical framework that enables a Unitree G1 humanoid to traverse height-constrained environments through variable-height bipedal walking and crawling. The learned policies regulate body height over complementary command ranges of 1.27--0.50m in bipedal locomotion and 0.50--0.20m in crawling, extending traversal beyond the clearance limits of crouched walking. To address contact-rich crawling dynamics, we employ a history-conditioned latent representation that captures terrain and interaction context from proprioceptive observations. A bidirectional transition policy further connects crouched bipedal locomotion and crawling across large kinematic and contact discontinuities. These skills are integrated with a LiDAR-based planner that converts point clouds into collision-free three-dimensional paths and locomotion commands, including proactive height targets. Real-world experiments demonstrate accurate height and velocity tracking, robust terrain traversal, reliable mode transitions and confined-space traversal with the proposed pipeline. Code and videos are available at this https URL.
https://arxiv.org/abs/2610.36546
Humans are dexterous, but traditional data collection paradigms such as teleoperation, kinesthetic teaching, and wearable exoskeletons force humans to act through the robot embodiment, bottlenecking their dexterity. Retargeting can avoid this. However, existing methods purely translate kinematics and ignore the real-world contact dynamics essential for task success. We present CARD: Contact-Anchored Retargeting for Dexterous Manipulation, a simulator and object-free framework that retargets human demonstrations to robot actions by explicitly preserving contact force targets. CARD unifies human data sources including video, motion capture, and tactile gloves via a shared hand--contact representation and generates explicit contact force targets in addition to kinematics. To maintain these contact targets during hardware open-loop replay, CARD also introduces a tactile tracking controller. For video which does not contain an explicit tactile source, we present Vid-HACO, our video-to-contact model that sets a new state of the art. Across our video, glove, motion-capture data and the GRAB dataset, CARD maintains contact on $43$--$78\%$ of contact frames, while kinematic and object-aware retargeting methods maintain contact on $<10\%$ and $22.5\%$ of the frames respectively. Further, integrating our formulation into physics-based retargeting improves strict task success from 12\% to 32\% on GRAB dataset. Finally, we show that our tactile tracker is critical to reproduce demonstrated forces during hardware replay. These results establish that contact preservation via CARD is a scalable interface for transferring human dexterity to robots.
https://arxiv.org/abs/2610.36539
We present CPG-ENN, a trainable quadruped locomotion framework that combines explicit neural coordination with learned motion realization. A symmetry-based eight-neuron central pattern generator (CPG) supplies gait rhythms, while a pretrained, leg-shared execution neural network (ENN) maps rhythmic signals and trajectory parameters to joint-angle references without online inverse kinematics. A single feedback policy modulates six physically interpretable trajectory variables. The controller tracks planar velocity and yaw-rate commands across walk, trot, pace, bound, and pronk without gait-specific learned controllers or transitionspecific rewards. Simulation yields 99.39% transition success across all 20 directed gait pairs and all source-target speed combinations from {0.5, 1.0, 1.5, 2.0} m/s. Ablations show high cross-gait transition feasibility without transition exposure; exposure mainly refines gait acquisition and velocity transients. Comparisons with AllGaits and Walk These Ways demonstrate accurate gait-speed regulation, and Unitree Go2 experiments validate five gaits and their transitions.
https://arxiv.org/abs/2610.36537
Differences in musculoskeletal morphology challenge policy reuse across individual models. Here we present MyoAcross, a framework that combines individual musculoskeletal model construction, morphology-conditioned policy learning and virtual model augmentation to enable muscle-driven reference-motion tracking without individual fine-tuning. Across 31 held-out individual models, MyoAcross achieves 99.24% completion and reduces tracking error by 22.60% relative to an unconditioned multilayer perceptron. Policy reuse extends to models of 22 held-out individuals constructed from single-image shape estimates, measured height and body mass, and, with asymmetry augmentation, to models with unilateral lower-limb shortening. Comparisons with measurements from 120 additional individuals show agreement in vertical ground reaction force waveforms and channel-dependent agreement between simulated muscle activations and electromyography. These results establish a common control framework for comparative simulations of movement across individual musculoskeletal models.
https://arxiv.org/abs/2610.36535
Humanoid behavior foundation models (BFMs) provide reusable whole-body motion priors: given a kinematic reference, they generate coordinated joint commands for motion replay, teleoperation, and VLA control. However, trained primarily on flat-ground motion, BFMs lack an explicit mechanism to adapt foot placement, swing clearance, and contact timing to local terrain. Many terrain-aware BFM approaches address this limitation by retraining or fine-tuning the tracker together with perception, incurring substantial data and computation costs while coupling ordinary tracking to the perception pathway. To bridge this gap, we propose GRAFT, a geometry-aware residual adaptation framework for frozen behavior trackers. GRAFT preserves the BFM parameters and motion-reference interface, while a lightweight adapter adds terrain-conditioned corrections only to lower-body execution targets. The adapter is trained with task and foot-geometry rewards, regularized to suppress unnecessary corrections on flat ground, and distilled from privileged terrain observations to onboard depth. Because the frozen BFM already provides whole-body reference tracking and nominal locomotion, GRAFT reduces terrain learning to a focused execution-adaptation problem. We instantiate the framework on four frozen trackers and evaluate stairs, gaps, and platforms in simulation. We further validate it through real-world deployment on a Unitree G1, where the adapted SONIC tracker traverses terrain with onboard depth and unmodified references.
https://arxiv.org/abs/2610.36507
As expansion and scalability in underwater oper- ations becomes more important and challenging, autonomous underwater vehicles (AUVs) become more relevant and the necessity for reliable autonomy more critical. A fundamental challenge in any autonomous underwater operation, from control to safe navigation and mapping, is state estimation; a notorious hard problem to address, especially in low visibility conditions. In this paper, we tackle this problem, by presenting SVIn+, a multi-sensor framework for robust state estimation of AUVs equipped with an IMU, cameras, a water-pressure sensor, a Doppler Velocity Log (DVL), and a compact 3D sonar. This framework extends an established open-source state-of-the-art visual-inertial SLAM, SVIn, by integrating water-pressure and DVL measurements into a tightly-coupled nonlinear optimiza- tion formulation resulting in improved estimates. To leverage the structural information of recently available 3D acoustic sonars while maintaining computational efficiency, we introduce a hierarchical architecture that incorporates estimates from a decoupled front-end via KISS-ICP, treated as relative pose factors within the factor graph. The proposed framework is validated through field deployments in a shipwreck and coral reef, demonstrating drift mitigation and global consistency. To support further research in underwater multi-modal fusion, the code and the datasets can be found on project website this https URL this https URL
https://arxiv.org/abs/2610.36454
While velocity-commanded RL policies are effective for controlling quadrupeds, they are a limited interface for humanoids that need to perform complex whole-body motions. Furthermore, RL tracking policies for whole-body motions typically have limited information about the desired future motion, preventing them from performing controlled deviations to achieve long-term task success; such information is particularly relevant when a controller must prepare for transitions between behaviors. We address these challenges using concise motion representations that can be generated by a high-level controller, given a behavior label or text command. These representations can be fed directly into a tracking policy to provide a detailed motion reference. Our method exhibits a high degree of flexibility in performing real-world robot motions such as dancing, fighting, or walking based on conditional information. At matched capacity, our adopted stochastic motion tokenizer reconstructs motions from the Unitree G1 at a level that exceeds state-of-the-art approaches such as finite scalar quantization (FSQ) and the vector-quantized autoencoder (VQ-VAE). The resulting discrete interface conditions whole-body tracking policies that execute generated dance, fight, and walk motions lasting 16.8 s each and a 35 s fight-to-dance sequence on a physical Unitree G1.
https://arxiv.org/abs/2610.36452