As expansion and scalability in underwater oper- ations becomes more important and challenging, autonomous underwater vehicles (AUVs) become more relevant and the necessity for reliable autonomy more critical. A fundamental challenge in any autonomous underwater operation, from control to safe navigation and mapping, is state estimation; a notorious hard problem to address, especially in low visibility conditions. In this paper, we tackle this problem, by presenting SVIn+, a multi-sensor framework for robust state estimation of AUVs equipped with an IMU, cameras, a water-pressure sensor, a Doppler Velocity Log (DVL), and a compact 3D sonar. This framework extends an established open-source state-of-the-art visual-inertial SLAM, SVIn, by integrating water-pressure and DVL measurements into a tightly-coupled nonlinear optimiza- tion formulation resulting in improved estimates. To leverage the structural information of recently available 3D acoustic sonars while maintaining computational efficiency, we introduce a hierarchical architecture that incorporates estimates from a decoupled front-end via KISS-ICP, treated as relative pose factors within the factor graph. The proposed framework is validated through field deployments in a shipwreck and coral reef, demonstrating drift mitigation and global consistency. To support further research in underwater multi-modal fusion, the code and the datasets can be found on project website this https URL this https URL
https://arxiv.org/abs/2610.36454
Drone-based 3D reconstruction and inspection require viewpoints that satisfy image-quality constraints while observing each surface region multiple times, which overlap-based planning heuristics do not guarantee. We study ground sample distance (GSD)-constrained $k$-coverage viewpoint selection for structures represented by surface voxels. Candidate viewpoints are generated along outward surface directions, screened with distance, viewing-angle, field-of-view, and occlusion tests, and augmented for voxels with insufficient visibility. Selection is then posed as set multi-cover with per-voxel coverage demands. We propose a dynamically weighted greedy heuristic that prioritizes remaining coverage deficits and scarce viewing alternatives, and compare it with sequential overlap-based pruning and an integer linear programming (ILP) formulation on the same candidate pools. Across two structures, four voxel resolutions, and three coverage requirements, the proposed approach achieves full or near-full $k$-coverage with compact viewpoint sets, using only 3.00--16.39\% more viewpoints than ILP while offering an interpretable selection process based on coverage deficits and viewpoint availability.
https://arxiv.org/abs/2610.36450
Traditional multiple sclerosis (MS) image analysis has primarily focused on retrospectively detecting and segmenting lesions. This study investigates whether baseline FLAIR MRI can identify regions at risk for future lesion formation beyond population-level spatial patterns. We introduce FORESEE-MS, an evaluation protocol that uses a fold-specific population-prior atlas as a baseline and assesses predictions using pooled voxel-level discrimination (AUROC and AUPRC) and within-patient lesion localization (Recall@Top-K%), with patient-level bootstrap confidence intervals. We evaluated five deep learning models (3D U-Net, Attn+ResBlock+VAE, ViT, and two SwinUNETR variants) using 5-fold cross-validation on 39 subjects from the MSSEG-2 dataset. The atlas achieved the highest pooled voxel-level AUROC and AUPRC, with no deep learning model reliably outperforming it on either metric. However, the 3D U-Net and Attn+ResBlock+VAE achieved higher mean voxel-level within-patient Recall@Top-K% than the atlas at all evaluated thresholds, although most paired confidence intervals for the differences included zero. These findings suggest that baseline FLAIR may contain patient-specific predictive information, but in this small cohort, it remains uncertain whether this information improves lesion forecasting beyond a population-prior atlas.
https://arxiv.org/abs/2610.36428
Monocular outdoor navigation requires robust camera motion estimation and a dense, navigable map, where 3D Gaussian Splatting SLAM serves this task through an explicit differentiable parameterization and closed-form projection. However, typically, the geometry is recovered by associating 2D pixels with 3D points, so a modular SLAM system absorbs tracking error into the map, leading to cascading degradation. To address these gaps, we present SG^2SLAM, which couples streaming spatial geometry with a ray-conditioned 3DGS kernel. Streaming spatial geometry replaces the per- frame cross-dimensional correspondence with a chunk-level metric prior that supervises tracking and mapping from one source. A ray-conditioned kernel extends each primitive with a viewing-direction subspace that senses the monocular camera viewpoints. The joint optimization over spatial geometry and poses ensures a globally consistent map and trajectory outcome. Experiments on the KITTI and Waymo Open datasets show that our SG^2SLAM surpasses the per-frame association baselines in the monocular outdoor navigation task. Code will be made publicly available upon acceptance.
https://arxiv.org/abs/2610.36312
Structure predictors like ESMFold fold proteins using neural network computation and have transformed structural biology. However, the driving mechanism from amino-acid (AA) sequence to 3D structure is insufficiently understood, and biological meaning remains locked in the dense network. Sparse autoencoders (SAEs) have shown promising results in obtaining interpretable concept features over an overcomplete basis of intermediate protein sequence-model representations. Yet folding models, which predict physical shape from AA sequence semantics, have no such account. We hypothesize that the features carrying the folding computation evolve in the 3D structural regression process. In this paper, we interpret the folding trunk in three steps. First, a pilot analysis on the representation distribution across modules and recycles locates distinct spatial computation in the trunk. Second, the dictionaries expose a division of labor: the single representation carries inherited semantics, and the pair representation computes the pairwise geometry. Third, we interpret the dictionary at scale with a reasoning language model, trace how the concepts compose across blocks by gradient-based attribution, and follow the interpreted code to the model's folding output, verifying where the computation aligns with, or departs from, known biochemistry. Together, the sparse dictionaries we train capture the relational geometry the trunk computes beyond the sequence model, and their concept activations forecast the model's own fold quality, turning the black-box folding trunk into a sparse, interpretable, and scientifically verifiable circuit.
https://arxiv.org/abs/2610.36226
Monocular 3D human mesh recovery (HMR) remains unreliable under weak observations caused by long camera-to-person distances, occlusion, and motion blur. In challenging scenarios such as sports, these factors make the problem highly ambiguous, as different 3D poses may yield similar 2D projections. This ambiguity is especially severe for one-stage HMR, which recovers all meshes directly from the full image without person crops or external 2D cues. To handle this ambiguity, we present UT-HMR ( Uncertainty-guided Temporal HMR), to our knowledge the first one-stage HMR framework to capture correlated pose uncertainty across joints. Each person query predicts a Gaussian distribution over the full SMPL pose with a compact low-rank-plus-diagonal covariance, which is converted into joint-wise precision weights for heteroscedastic supervision while keeping inference deterministic. Temporal early fusion further injects neighboring-frame evidence before pose decoding, supplying the visual evidence needed to resolve the ambiguity that the uncertainty captures. With a lightweight ViT-B backbone, UT-HMR achieves state-of-the-art results on VIP-HockeyPose-v2 (ice hockey) and WorldPose (soccer), reducing MPJPE, PA-MPJPE, and PVE by up to 4.7%, 3.8%, and 5.6%, and remains competitive on 3DPW against methods with larger backbones and higher input resolutions.
https://arxiv.org/abs/2610.36203
3D Gaussian Splatting (3DGS) has rapidly become the preferred representation for high-fidelity novel view synthesis and 3D scene reconstruction. However, the learned representation encodes sensitive visual information including human faces, license plates, documents, and computer screens, raising significant privacy concerns when trained splats are shared or deployed. In this work, we address the underexplored problem of privacy preservation in Gaussian Splatting by proposing a representation-level anonymization framework that directly anonymizes a trained splat. Given a trained splat and a user-provided reference view identifying sensitive content, our method localizes the corresponding regions in the underlying 3D representation and directly anonymizes them, ensuring that the sensitive information is absent from all subsequently rendered novel views while preserving the overall scene geometry and visual fidelity. We achieve this post-training anonymization in less than 1 second. Furthermore, we extend our framework with a privacy-by-design training strategy that prevents sensitive content from being embedded into the representation during optimization, enabling the generation of privacy-preserving splats directly from training images. Our method achieves a remarkably low Face Similarity Measure (FSM) of 9.79% at a retained Face Detection Rate (FDR) of 39.47% and makes sensitive text completely unreadable with an OCR Character Error Rate of 1.00. Our work aims to serve as the primary stepping stone towards privacy-aware 3D representations and motivates further research along these directions.
https://arxiv.org/abs/2610.36168
Geometry foundation models recover camera poses and dense geometry from a set of images with a feed-forward network, but they expect pinhole images. That assumption is inside the backbone too: the positional encoding and the training loss both bind an image position to a direction in space, and both depend on the lens. We condition both on the dense ray field, the unit direction through every pixel, which describes any central camera without a lens type, distortion coefficients or a bound on field of view. Angular coordinates give the rotary encoding the measured ray angle of each patch, evaluated per view, and solid-angle weighting scales the point loss by the area each pixel covers on the sphere, so neither the encoding nor the supervision depends on the lens. Any3R is therefore a feed-forward model that takes any central camera, and is robust to mixing many camera types per scene, with no retraining per lens. On a benchmark of thirteen central cameras across three datasets, where every method reconstructs with its own predicted camera poses, it is the most consistently accurate method. Any3R enables scalable 3D reconstruction from heterogeneous crowdsourced and archival imagery collections sourced across diverse camera types. Project page: this https URL
https://arxiv.org/abs/2610.36150
4D novel view synthesis (NVS) aims to render dynamic scenes across viewpoints and timestamps, which requires jointly inferring 3D structure and temporal dynamics. Existing monocular feed-forward methods often rely on explicit 4D Gaussian representations, which are prone to temporal inconsistency and severe rendering artifacts. We present FL4N, the first feed-forward latent 4D NVS model. Instead of relying on explicit 4D primitives, FL4N encodes a 4D scene prior into a unified latent representation across space and time. Our core insight is that learning temporal dynamics as residuals on top of a pretrained static latent prior enables effective 4D modeling with limited dynamic training data. To this end, we introduce a lightweight dynamic encoder that leverages static scene features to disentangle object motion from camera-induced parallax. Trained solely with an image synthesis objective, FL4N achieves state-of-the-art 4D NVS quality while rendering in real time. Its learned latent representation generalizes to real-world videos and disentangles viewpoint from time.
https://arxiv.org/abs/2610.35854
Multimodal medical AI requires a common visual interface for encoding heterogeneous imaging evidence for patient condition modeling. However, existing medical visual tokenizers are often tied to a specific dimension and imaging modality, forcing multimodal systems to rely on fragmented and poorly reusable representations. We introduce MedVTok, a general-purpose visual tokenizer that maps 2D images and 3D volumes from diverse imaging modalities into a unified token space. Building such a tokenizer poses two key challenges: preserving anatomical structure across dimensions and capturing clinical semantics across modalities. To this end, MedVTok introduces (i) slice differential regularization, which explicitly models inter-slice anatomical coherence missing in previous per-pixel/per-voxel supervision, and (ii) multi-expert representation alignment, which integrates knowledge from multiple medical expert encoders while retaining modality-specific complementary knowledge. Trained on 28M images and 70K volumes across 9 imaging modalities, MedVTok supports classification, retrieval, segmentation, synthesis, visual question answering, and medical report generation through a single tokenizer. Across 24 benchmarks, MedVTok achieves state-of-the-art performance, demonstrating a scalable token interface that unifies medical image dimension, modality, and task usage.
https://arxiv.org/abs/2610.35842
Image and video generators can produce spatially consistent visual content, but how to use this capability to improve spatial understanding remains underexplored. We study this problem from two perspectives: geometric supervision during training and explicit geometric evidence during inference. To this end, we introduce a unified geometric understanding and generation model (GeoUG) that integrates depth and multi-view generation with spatial understanding. First, we design a multi-scale depth codec that enables metric-depth generation using a pretrained visual autoencoder, and show that joint training yields task-dependent gains in spatial understanding. Second, we introduce 3DCueBench to control geometric difficulty while balancing selected 2D cues, and find that generated depth provides larger reasoning gains on questions requiring fine-grained geometric discrimination. Building on this finding, we develop adaptive interleaved reasoning, in which GeoUG first drafts an answer and then decides whether to generate geometric evidence to confirm or revise it. We train this decision through reinforcement learning, balancing accuracy gains over retaining the draft against generation cost. GeoUG achieves circular accuracies of 97.9%, 90.8%, and 94.2% on CV-Bench-3D, 3DCueBench, and DA-2K with fewer generation calls than always generating.
https://arxiv.org/abs/2610.36022
Feed-forward 3D reconstruction models such as VGGT regress cameras and geometry in a single forward pass, but they report no uncertainty for the camera poses they predict: an incorrect relative pose looks no different from a correct one. We ask whether the frozen model nonetheless knows when its pose is wrong. On HardMatch, a benchmark of 1,000 deliberately difficult image pairs on which VGGT fails on 35% of pairs, a linear probe on VGGT's frozen features predicts pose failure on held-out categories with ROC-AUC 93.5%, compared with 79.7% for VGGT's own point-map confidence and 77.7% for a classifier trained on all of VGGT's outputs. The probe catches failures VGGT is confident about, lets a downstream system abstain on the pairs it distrusts, and transfers without retraining to rotation failures on PhotoTourism and ScanNet-1500, beyond what co-visibility explains. This knowledge is absent from the per-image encoder: it is computed partway through the layers that fuse the two views, and the same holds for a second model, $\pi^3$. In essence, we find that VGGT knows more about its own failures than it reports.
https://arxiv.org/abs/2610.35806
Recent advancements in text-guided 3D editing, particularly with 3D Gaussian Splatting (3DGS), have shown promise but still lag behind the flexibility of 2D editing tools. Existing methods face a critical trade-off between preserving multi-view consistency and allowing structural modifications. Image-based editors can also struggle to apply the intended edit to objects viewed from unusual angles. To address these limitations, we introduce VidEdit3D, a framework that reformulates 3D scene editing as a trajectory-based video editing task. By drawing a parallel between camera movement in static 3D scenes and temporal dynamics in video, we leverage the robust spatiotemporal priors of pre-trained Video Diffusion Models (VDMs) to encourage semantic and structural coherence across views. Specifically, we propose Trajectory-Guided Rendering (TGR) to select informative keyframes and construct smooth video clips aligned with VDM input requirements. To propagate edits from an anchor view to these clips, we develop Flow-Aligned Video Editing (FAVE), a training-free framework incorporating an Editing Consistency Guidance (ECG) mechanism. ECG contrasts source and edited image conditions at a shared latent state, using scheduled source-image amplification to strengthen adherence to the edited reference while maintaining original scene context. Finally, we introduce Region-Selective 3DGS Refinement (RS-GS) to strictly confine geometric and appearance updates to target primitives, reducing background attribute leakage. Experiments demonstrate stronger instruction alignment and better multi-view consistency than the baselines.
https://arxiv.org/abs/2610.35756
World-action models (WAMs) offer a promising framework for embodied intelligence, yet mainstream approaches remain centered on video foundation models or vision-language models. Even when geometric features extracted by 3D models such as VGGT are incorporated, they are typically passed into a video model or VLM that serves as the primary backbone, leaving 3D geometry as an auxiliary input or prediction target rather than the native foundation for world modeling. We present E0.5, a geometry-native world-action model built directly on 3D foundation models. E0.5 introduces two key innovations. First, it adopts a 3D foundation model as the primary backbone, making 3D geometry the native representation for both world modeling and action prediction. Second, it explicitly predicts future 3D states together with actions, enabling the model to capture geometric world dynamics beyond action-only modeling or future video prediction. Experiments on RoboTwin 2.0 first demonstrate the effectiveness of E0.5 without embodied-data pretraining, achieving success rates of 89.90\% and 50.09\% under clean and randomized settings, respectively. Building on these results, we further pretrain E0.5 on more than 160k robot trajectories from AgiBotWorld-Beta, jointly learning robot actions and future geometry within the pretrained 3D foundation. This embodied pretraining improves mean real-world manipulation success rates by approximately 15 and 7 percentage points on AgileX Piper and Zerith H1, respectively. Together, these results demonstrate the potential of geometry-native foundations to acquire robot interaction knowledge and transfer it to physical manipulation. E0.5 embodies this geometry-native approach as a member of the VWA family of world-action models.
https://arxiv.org/abs/2610.36011
Generating videos of a specific subject from a few reference images remains challenging when the camera reveals surfaces that are not visible in the input. Early subject-to-video (S2V) methods condition on a single reference image and must therefore infer the subject's unseen appearance and geometry as the viewpoint changes. To address this limitation, recent methods extend S2V to multiple reference views, providing more information about the subject from different viewpoints. However, they do not explicitly specify the 3D structure that connects these observations. In addition, existing training data do not guarantee that viewpoint changes preserve the same underlying 3D subject. We present OmniShowcase, built on two components: (i) a fully automated data synthesis pipeline that produces training videos along diverse camera trajectories, with viewpoint variation driven by underlying subject geometry, even spanning full 360-degree orbits; and (ii) a geometry-conditioning method that provides the video model with a turntable of surface-normal maps reconstructed from the reference views without requiring temporal alignment with the generated frames. We construct Showcase-4K, a corpus of 3D-asset-based videos covering twelve camera motions across 88 trajectory configurations with reconstruction-derived surface-normal conditioning, and ShowcaseBench, a held-out evaluation set with the source meshes and camera parameters used to render each video. Experiments show state-of-the-art subject identity and 3D consistency while maintaining competitive video quality and motion. Project page: this http URL
https://arxiv.org/abs/2610.35684
Efficient robotic data collection remains a major bottleneck for vision-language-action (VLA) policy learning, especially for tasks requiring accurate end-effector positioning and camera-action alignment. This challenge is particularly severe in electronic-waste disassembly, where robots operate in cluttered assemblies of densely packed, visually similar components. Full digital-twin simulation is difficult because many parts are thin, reflective, or mechanically complex, making accurate object-level meshes and contact models difficult to obtain. In this work, we focus on pre-contact reaching and propose a 3D Gaussian Splatting (3DGS)-based data generation pipeline for wrist-camera VLA adaptation. Our method reconstructs the real workspace with 3DGS and renders diverse wrist-camera observations from robot-aligned poses. These observations are paired with smooth, structured reaching trajectories to provide robot-aligned visual-action supervision for VLA fine-tuning. We further augment the VLA policy with an instruction-conditioned reach verifier that estimates target proximity and provides reliable termination before physical interaction. Experiments in motherboard disassembly demonstrate precise VLA-based reaching using wrist-camera observations alone, without an external side-view camera. With $\pi$0.5, 1,500 generated trajectories achieve 80.0\% precise-reaching success across three targets, compared with 58.7\% using 150 teleoperated demonstrations, while requiring less than 10 minutes of active human capture. Project website: this https URL
https://arxiv.org/abs/2610.35626
Evaluating deformable 3D reconstruction requires ground truth linking camera motion, surface deformation, material correspondence and image appearance. We introduce the Synthetic Deformable Tubular Benchmark, generated with LumenMorph, an open-source toolkit for creating, annotating and evaluating tubular scenes. The release contains 5,580 RGB images. Its baseline crosses three surface-motion conditions with moving and stationary cameras in six scene families; matched appearance variants cover only moving-camera finite-element actions in four families. Documented public and evaluation interfaces expose camera poses, geometry, depth, deformation fields, persistent material correspondences and discrete finite-element records. Persistent triangle identities and material weights let users track the same surface location across frames and query its three-dimensional trajectory. Separately implemented geometric and mechanical checks assess annotation consistency with the generating models. Structure-from-motion, optical-flow and supplied-geometry displacement-interpolation studies demonstrate how the resource distinguishes registration coverage from geometric accuracy, exposes camera- and surface-motion effects, and tests the benefits and mismatch of mechanical priors. Public readers, evaluation contracts and the configurable generator support reuse and extension. Data integrity, fixed-environment repeatability and retained-prediction score replay have distinct verification scopes. The benchmark provides a controlled synthetic reference without claiming anatomical or clinical realism.
https://arxiv.org/abs/2610.35621
Recovering an object's 3D structure and camera motion from a few uncalibrated views is a fundamental problem in computer vision. Classical structure from motion methods recover 3D geometry consistent with the input images but cannot recover unseen regions; native generation methods produce plausible 3D objects which are related but not necessarily faithful to the input images. Methods simply concatenating reconstruction and generation allow error to cascade across the two stages, instead of producing a 3D object consistent with both the distribution and the input. We propose GenSfM, which integrates image-based 3D reconstruction with a native 3D diffusion model. In particular, we use a multi-modal diffusion transformer to jointly denoise the shape latent and per-view pose latents under shared self-attention, grounding generated geometry in the observed views while using object-level priors to infer unobserved regions. A compact 3D-native UV-volume tokenization keeps the joint sequence small as views are added, and a pose-aware stage refines geometry and texture by sampling per-voxel image features at the recovered camera poses. On Toys4k and GSO, for $4$ uncalibrated views, GenSfM improves novel-view PSNR by $3.2$-$4.5$ dB and reduces median Chamfer distance by $2.8$-$3.8\times$ over a strong native-3D generation baseline, while recovering input-view poses over $96\%$ Acc@$5^\circ$ without any external pose-estimation backbone, post-hoc optimization, or known intrinsics. Project page: this https URL.
https://arxiv.org/abs/2610.35522
Deploying large vision-language models (LVLMs) on resource-constrained embodied agents for 3D visual question answering necessitates cloud-edge collaboration. However, offloading massive visual data to the cloud over bandwidth-limited and noisy channels introduces severe latency and transmission distortion. To address this, we propose TP-JSCC, an efficient token pruning and joint source-channel coding method for LVLMs-based 3D-VQA in Cloud-Edge Collaboration. First, we develop a Local and Global Semantics-based Hybrid Token Pruning (LGS-HTP) module to significantly reduce the visual token count. By decoupling foreground-background tokens and jointly selecting local and global semantics, LGS-HTP effectively reduces redundancy while preserving reasoning-critical tokens. Second, we introduce a lightweight Token Joint Source-Channel Coding (T-JSCC) module to further compress the pruned tokens and ensure their robust transmission over error-prone channels. By employing lightweight cascaded linear layers and Signal-to-Noise Ratio (SNR)-adaptive mechanism, this module adapts to fluctuating channel conditions while maintaining minimal computational overhead. Extensive experiments on ScanQA and SQA3D datasets indicate the exceptional efficiency and robustness of our approach. Specifically, on ScanQA validation set, the LGS-HTP module could achieve 90% pruning ratio while incurring less than a 1% CIDEr loss. Building on this, the T-JSCC further compresses the tokens by 18 times, resulting in an overall 180 times data volume reduction for robust transmission, while saving 90% in computational complexity for LVLM deployment. Our code is available at this https URL.
https://arxiv.org/abs/2610.35489
3D Gaussian Splatting (3DGS) has become a promising representation for real-time novel view synthesis and 3D scene reconstruction. For practical deployment, recent studies have explored pose-free feed-forward 3DGS, which reconstructs Gaussian representations directly from unposed input images. However, these methods remain sensitive to residual pose errors, which perturb canonical-space Gaussian transformation, introducing noisy supervision for geometry and attribute learning. To address this problem, we present SG-Splat, a pose-free feed-forward 3DGS framework that improves robustness to pose uncertainty and stabilizes the learning of Gaussian primitives. SG-Splat decouples geometry estimation and Gaussian attribute prediction into two dedicated branches, reducing error coupling between pose-sensitive geometry and Gaussian attributes. We further introduce a coarse-to-fine refinement pipeline, consisting of Flow-Guided Pose Refinement (FGPR) and Residual-Guided Geometry Correction (RGC), to improve geometric alignment before Gaussian attribute reconstruction. Specifically, FGPR refines camera poses with flow-based correlation features and differentiable bundle adjustment. RGC then corrects initial point maps using depth residuals derived from FGPR, producing more reliable Gaussian centers. To stabilize training, we introduce a dual-path strategy that mixes ground-truth and predicted poses for canonical transformation. It provides clean supervision for Gaussian attributes while improving geometry robustness to residual pose errors. Extensive experiments on DL3DV and RealEstate10K show that SG-Splat achieves state-of-the-art performance in both novel view synthesis and pose estimation.
https://arxiv.org/abs/2610.35361